Seedboxes and seeding

Electr0man · 2018-04-12T04:06:07+00:00

Expected, how about deluge-console -h

Doubt that deluge on BYSH comes without deluge-console :D

alexaturnonthelights · 2018-04-12T03:55:55+00:00

can't use locate, says command isn't found

Electr0man · 2018-04-12T03:53:38+00:00

Weird. Try locate deluge-console then

sekyuritei · 2018-04-12T03:53:22+00:00

My friend is doing one of their Epyc servers, but I couldn't make myself pay the setup fee. You'd also think that we're in the day where you can provision bare metal and access it within X-XX minutes (other people do this). I guess you get what you pay for, and it's still as cheap as gets for what you get (without being a little fly-by-night). I can tell you from getting burned from small providers: they can go away at any time.

alexaturnonthelights · 2018-04-12T03:30:28+00:00

https://i.imgur.com/MSldTim.png

nothing happened

Electr0man · 2018-04-12T03:21:00+00:00

Looks like that (deluge-console executable isn't in default location), do which deluge-console in terminal and change its path in your autodl config to the terminal output.

Bersuiteroo · 2018-04-12T03:15:12+00:00

i am tempted to go for the SUKHOI-SSD :)

alexaturnonthelights · 2018-04-12T03:05:03+00:00

i got error saying could not find /usr/bin/deluge-console

was I supposed to change that?

UltraSeedbox · 2018-04-12T03:01:28+00:00

I joined the swarm too late. :)

Electr0man · 2018-04-12T02:09:43+00:00

So, my trial is over and so far I can say this is literaly the best shared HDD seedbox slot I've ever used so far. Crazy fast, no joke.

Electr0man · 2018-04-12T02:01:45+00:00

Yes.

-p /path/to/downloads is that path where you want the torrent data to be downloaded to.

alexaturnonthelights · 2018-04-12T01:49:51+00:00

I think I might understand. Not sure.

So this deluge-console way from that post bypasses any watch folder and is like you added the torrent manually? And then that path part is where you want the completed torrent to be saved?

Electr0man · 2018-04-12T01:39:58+00:00

Nah, that's autodl variable part, different for each downloaded torrent.

Electr0man · 2018-04-12T01:37:13+00:00

Someone has recommended this https://checkservers.ovh/ Might be worth a try.

BTW, if you wanted specifically E5v2 servers, those seems to be discontinued.

alexaturnonthelights · 2018-04-12T01:36:44+00:00

No what I’m saying is shouldn’t the path be the watch folder? How else will deluge add it?

Electr0man · 2018-04-12T01:35:01+00:00

The watch folder is another option, but adding torrents via deluge-console is the fastest way.

Electr0man · 2018-04-12T01:32:06+00:00

yup.

alexaturnonthelights · 2018-04-12T01:31:43+00:00

Hold up though...

I have deluge setup in the options to where it’ll auto add the stuff in the /watch folder

Shouldn’t the path be the watch folder?

alexaturnonthelights · 2018-04-12T01:25:56+00:00

So the $ part stay the same then?

add -p /home/blah/blah $(TorrentPathName)

Electr0man · 2018-04-12T01:00:56+00:00

You'll only need to change /path/to/downloads from this piece of command - this is the path where it'll be saving the torrent contents while adding. Like you may set up different filters and set different actions for each with different paths, like for UHDBits filter it may be /home/user/downloads/uhdbits , for btn filter /home/user/downloads/btn etc. The folder needs to exist tho.

alexaturnonthelights · 2018-04-12T00:51:57+00:00

I saw that thread but didnt know what to put here

add -p /path/to/downloads $(TorrentPathName)

Bersuiteroo · 2018-04-12T00:51:19+00:00

1.29 only a torrent whit 70 peers conected in ipt?? mmmm so bad...

Electr0man · 2018-04-12T00:37:45+00:00

irssi is the name of a commandline IRC client for linux. So basically autodl plugin uses irssi, monitoring announce channel(s) and grabs torrents using the metadata from those channels, based on your filter(s) restrictions. Since the bot on the chan announces new uploads immediately after they're being uploaded to the site, autodl-irssi grabs them right away and you can set it up to be sending it to deluge via deluge-console, check this out. If your deluge daemon runs on a different port than default 58846, you'll need to specify it in the command.

If autodl-irssi plugin isn't pre-installed with their rutorrent install and you don't want to mess with it, contact bytesized support, they'll do it for you (I guess). Never used them so idk how's it going there.

-XorCist- · 2018-04-12T00:37:22+00:00

How are the ryzen's for a plex server? I have a i7 12 core hetzner now that im maxxing out. has a 12000 Passmark, will the extra 3000 be noticable? Webtropia sounds really interesting!

alexaturnonthelights · 2018-04-11T22:06:18+00:00

so what's the purpose of the irssi part? Isn't that an rss thing?

Electr0man · 2018-04-12T04:06:07+00:00

Expected, how about deluge-console -h

Doubt that deluge on BYSH comes without deluge-console :D

alexaturnonthelights · 2018-04-12T03:55:55+00:00

can't use locate, says command isn't found

Electr0man · 2018-04-12T03:53:38+00:00

Weird. Try locate deluge-console then

sekyuritei · 2018-04-12T03:53:22+00:00

My friend is doing one of their Epyc servers, but I couldn't make myself pay the setup fee. You'd also think that we're in the day where you can provision bare metal and access it within X-XX minutes (other people do this). I guess you get what you pay for, and it's still as cheap as gets for what you get (without being a little fly-by-night). I can tell you from getting burned from small providers: they can go away at any time.

alexaturnonthelights · 2018-04-12T03:30:28+00:00

https://i.imgur.com/MSldTim.png

nothing happened

Electr0man · 2018-04-12T03:21:00+00:00

Looks like that (deluge-console executable isn't in default location), do which deluge-console in terminal and change its path in your autodl config to the terminal output.

Bersuiteroo · 2018-04-12T03:15:12+00:00

i am tempted to go for the SUKHOI-SSD :)

alexaturnonthelights · 2018-04-12T03:05:03+00:00

i got error saying could not find /usr/bin/deluge-console

was I supposed to change that?

UltraSeedbox · 2018-04-12T03:01:28+00:00

I joined the swarm too late. :)

Electr0man · 2018-04-12T02:09:43+00:00

So, my trial is over and so far I can say this is literaly the best shared HDD seedbox slot I've ever used so far. Crazy fast, no joke.

Electr0man · 2018-04-12T02:01:45+00:00

Yes.

-p /path/to/downloads is that path where you want the torrent data to be downloaded to.

alexaturnonthelights · 2018-04-12T01:49:51+00:00

I think I might understand. Not sure.

So this deluge-console way from that post bypasses any watch folder and is like you added the torrent manually? And then that path part is where you want the completed torrent to be saved?

Electr0man · 2018-04-12T01:39:58+00:00

Nah, that's autodl variable part, different for each downloaded torrent.

Electr0man · 2018-04-12T01:37:13+00:00

Someone has recommended this https://checkservers.ovh/ Might be worth a try.

BTW, if you wanted specifically E5v2 servers, those seems to be discontinued.

alexaturnonthelights · 2018-04-12T01:36:44+00:00

No what I’m saying is shouldn’t the path be the watch folder? How else will deluge add it?

Electr0man · 2018-04-12T01:35:01+00:00

The watch folder is another option, but adding torrents via deluge-console is the fastest way.

Electr0man · 2018-04-12T01:32:06+00:00

yup.

alexaturnonthelights · 2018-04-12T01:31:43+00:00

Hold up though...

I have deluge setup in the options to where it’ll auto add the stuff in the /watch folder

Shouldn’t the path be the watch folder?

alexaturnonthelights · 2018-04-12T01:25:56+00:00

So the $ part stay the same then?

add -p /home/blah/blah $(TorrentPathName)

Electr0man · 2018-04-12T01:00:56+00:00

You'll only need to change /path/to/downloads from this piece of command - this is the path where it'll be saving the torrent contents while adding. Like you may set up different filters and set different actions for each with different paths, like for UHDBits filter it may be /home/user/downloads/uhdbits , for btn filter /home/user/downloads/btn etc. The folder needs to exist tho.

alexaturnonthelights · 2018-04-12T00:51:57+00:00

I saw that thread but didnt know what to put here

add -p /path/to/downloads $(TorrentPathName)

Bersuiteroo · 2018-04-12T00:51:19+00:00

1.29 only a torrent whit 70 peers conected in ipt?? mmmm so bad...

Electr0man · 2018-04-12T00:37:45+00:00

irssi is the name of a commandline IRC client for linux. So basically autodl plugin uses irssi, monitoring announce channel(s) and grabs torrents using the metadata from those channels, based on your filter(s) restrictions. Since the bot on the chan announces new uploads immediately after they're being uploaded to the site, autodl-irssi grabs them right away and you can set it up to be sending it to deluge via deluge-console, check this out. If your deluge daemon runs on a different port than default 58846, you'll need to specify it in the command.

If autodl-irssi plugin isn't pre-installed with their rutorrent install and you don't want to mess with it, contact bytesized support, they'll do it for you (I guess). Never used them so idk how's it going there.

-XorCist- · 2018-04-12T00:37:22+00:00

How are the ryzen's for a plex server? I have a i7 12 core hetzner now that im maxxing out. has a 12000 Passmark, will the extra 3000 be noticable? Webtropia sounds really interesting!

alexaturnonthelights · 2018-04-11T22:06:18+00:00

so what's the purpose of the irssi part? Isn't that an rss thing?

seedboxes

View Public Moderation log

Helpful links to check before asking questions.

MODERATORS

seedboxes

View Public Moderation log

Helpful links to check before asking questions.

MODERATORS

seedboxes

View Public Moderation log

Helpful links to check before asking questions.

MODERATORS

Welcome to Reddit,

seedboxes

View Public Moderation log

Helpful links to check before asking questions.

MODERATORS

Welcome to Reddit.