large bumper ducts for first gen front bumpers.

adamturbo1 · Jun 8, 2026

decided to scan my bumper and print some new ducts for the bumper. these could be used for brake cooling as well as other functions. i will be using the right duct to send air flow to cool the transfer case via a hose, and i will be using the left duct to send air to my modified air box mod i did years ago. i also printed cut out templates so getting the holes cut will be easy. i will fix the ducts to the bumper with either 3m tape on the lip , or panel bond from behind.
while i was at it i also printed up the primary and secondary intake tubes to the airbox.

Automotive Exterior Automotive lighting Grille Bumper Hood

Plastic Silver Still life photography Carbon fibers

Silver Hardwood Still life photography Carbon fibers

adamturbo1 · Jun 9, 2026

Got everything mounted up. Driver side is intake, passenger side is transfercase cooling.

Automotive Exterior Bumper Hood Grille Automotive Side Marker Light

Sensitive content, not recommended for those under 18

Engine Carbon fibers Automotive Fuel System Wire Electrical cable

AND PASSENGER SIDE

Fender Bumper Car door Carbon fibers Hubcap

Pipe Automotive Exhaust Carbon fibers Synthetic rubber Exhaust system

Automotive Exhaust Pipe Exhaust system Carbon fibers Automotive Fuel System

$Car Automotive lighting Automotive Exterior Automotive Tire Bumper$

Warpath · Jun 9, 2026

Very Cool!! (see what i did there)

CrazyAirborne · 2026-06-09T15:37:02.000Z

this turned out really nicely! well done! I would personally paint the tubing black, at least the portions you can see from the front and inside the engine bay, but other than that, very unique and looks functional, which is awesome! I was looking at doing something similar but through my hood for my intake. I plan to get a CE or aftermarket hood anyways, so figured it wouldnt hurt to attempt something on my stock one in the mean time.

adamturbo1 · 2026-06-09T21:29:20.000Z

i was going to run black tube, but it was 3x the price and not in stock. when i have some time i will change that out. also printed some naca ducts so in future will add those to the undertray.

25SSRedP+ · 2026-06-09T16:08:59.000Z

you do good work!

josh42x · 2026-06-16T17:00:13.000Z

That's awesome! Would you be willing to share the files so I can give it a shot?

large bumper ducts for first gen front bumpers.

Brands in our community

Top Contributors this Month

Recommended Communities