trangia FAQ
FAQ
Can I use my Trangia stove indoors? Can you wash Trangia parts in the dishwasher? I’m looking for a user manual, where are they?
FAQ – Frequently Asked Questions
Click on the question to see the answer. Can’t find what you’re looking for? Check out our support page or contact our helpful support team
Burners & fuel
Can I use both spirit burner and gas burner in my Trangia stove?
Sure! If you have bought a stove with, for example, an spirit burner, you can buy an extra gas burner and switch between. See our burners >
How can I customize my old Trangia stove for the Gas burner?
Cut a larger hole among the small holes on the side of the lower windshield that are four holes wide and four holes high.
It gasps/leaks gas when I connect the gas burner to the gas container, why?
Its normal. There may be differences in how quickly the gas container valve opens when connecting between different gas containers/ different valves. To minimize leakage, keep the gas container in upright position when connecting, and quickly screw the last turns.
My Gas Burner do not work as it should, what can I do?
The Gas burner needs regular cleaning. Read more in the Instructions how to clean it and more useful information on how to take care of the burner.
Which gas container fits Trangia’s Gas Burner & Multifuel Burner?
All propane/butane gas container with threaded valve complying with standard EN417, which is an international standard. Primus, MSR, Optimus, Jet boil are examples of gas container manufacturers.
Can Trangia’s Spirit burner, Gas burner or fuel bottles be transported on airplane?
Always consult with your airline what applies. Unfortunately, we can not answer that.
How do I clean the Spirit burner?
Normally, the burner is maintenance-free. If you have got food or dirt over the burner you can rinse/wipe it with water. Soap impregnated steel wool can be used to polish the exterior. Allow to dry thoroughly before use.
Can I save fuel in the Spirit burner for another time?
Fuel can be stored in the burner for the next day’s cooking eg. Otherwise, it is better to pour it back in the bottle, or burn it out. Don´t store fuel in the burner and pack it down. It can leak.
I see something white inside the small holes on my Spirit burner, what is it?
It is a wick of 100% cotton that is needed for the burner to function properly.
Use my Trangia
Can I use my Trangia stove indoors?
Yes, you can. A camping stove is made for outdoor use. If still needed to use indoors so keep in mind: Good ventilation, fireproof surface, free above and always under supervision.
Also consider following local regulations, laws and injunctions that may apply in your country.
My pot/pan has melted, how could this happen?
If you “dry cook”, as in place the pot/pans over the flame without any food, liquid or food fat, it will quickly become too hot and the pot/pans can melt.
My windsheild has melted, how could this happen?
The air holes in the lower windshield should be facing the wind. If placed wrong or the wind direction suddenly reverses, you can get a back suction which can causes it to melt in the air holes. Spilled fuel on the ground and on the windshield can also cause damage.
Can the various Trangia pots and pans be used over an open fire or other heat source?
Yes, all pots/pans can be used over open fire, Spirit or Gas stoves. Keep in mind that some products have plastic parts that can melt in direct contact with fire. Again, caution applies to overheating.
Can Trangia’s Multi-disc be used as a lid when cooking on the Trangia stove?
No, it can soften and lose shape. But it is good to use the Multi-disc as a lid to conserve heat afterwards.
Can you clean the Trangia stove and other parts in the dishwasher?
No. Dishwasher detergent is too strong and causes unsightly stains and a rough surface on aluminum. If it has happened anyway, it is still safe to use the parts.
How do I clean my Trangia stove?
Hand washing is recommended. For extra washing power, use Soap Wool or Schotch brite sponge, but not on your non-stick pots that have a more sensitive surface.
My pot or kettle has got discoloration that does not go away. I have only boiled water, what is it?
Water contains salts & various metals that react with aluminum and can cause discoloration to brown, yellow or even black shades. It´s difficult to remove but it´s harmless to continue using the pots.
Our material
What is Trangia’s non-stick coating made of?
Our non-stick coating is free from harmful PFAS substances such as PFOA and complies with the requirements of the EU’s chemical directive REACH. The main component in the non-stick layer is PTFE, a non-conductive, water, heat, and chemical-repellent material. The material is free from the health-hazardous substance PFOA, which is the most well-known of all PFAS chemicals.
Does Trangia’s products contain nickel?
Nickel is not actively added to our aluminum alloy, and therefore, the nickel content is not measured. Approximately 99.9% of our aluminum consists of substances that are measured and analyzed. Any nickel present as impurity in the material constitutes a very small proportion. Nickel is also not added during hard anodization. Duossal is made of aluminum and stainless steel. The stainless steel contains nickel, but it is considered to be so tightly bound that it does not pose any risk of allergy upon skin contact, similar to a regular stainless steel sink or pot commonly found at home.
Where does your material come from?
The raw material, such as aluminium and nonstick discs, in our products comes from European suppliers such as Hungary and Italy. Over 97% of our purchases are local. Only our fabric cases are manufactured in China.
Buy Trangia
Where can I buy Trangia?
From our own webshop, where we deliver world wide. To the webshop >>
In Sweden, we are available at most well-stocked outdoor stores and if you are looking in other countries, you can contact our distributors or use our map function for retailers.
Contact information here >>
Is there an official Trangia store?
Sure! In Trångsviken we have our own Factory store & Museum. Welcome!
Where do you produce your products?
All our production takes place in Sweden. Our factory is located in Trångsviken. A small village in Jämtland between Åre & Östersund.
Problems with payment on trangia.se
Did you accept cookies when you entered the site? -If not, please do so, otherwise our payment methods will not work. Are you using a VPN? –There may be problems if, for example, you live in Germany and the VPN is set to the USA. Your delivery country must match the currency and available payment method. Try another device! – For example, if you used a mobile, try using a PC/desktop. Are you using a digital wallet/ewallet? – Choose another payment method as we have seen that it can cause issues for some users.
Find on this site
Where can I find name of fuels in the different countries?
I’m looking for a an instruction to my Trangia, where are they?
Is there a list of weight & measures ?
Weight & measures Table >>
Also look at the specific article in our webshop
How do I contact you?
If you want to talk to us at Trangia in Sweden, please call or email. Feel free to use our form bottom corner! We also have distributors in several countries for local help & info.
FAQ Engraving
Can you get a different font on the text engraving?
Not if you choose text engraving. Baskerville is the only font available at this time. If you want to design your own look, you can always create a logo and upload it.
What is meant by logo/logotype?
A logo is a symbol, text or graphic image – or a combination of these. The best results for engraving on our materials will be if the logo is black or white. We cannot engrave based on a photo. The file submitted to us must be a vectorized file in one of these formats: .eps .dxf .svg .pdf
Can you help me make a logo?
No, unfortunately, we cannot help with that.
Can I see a preview of the windshield before you engrave?
No, preview is currently not available. You can preview the text in the shopping cart and we will engrave according to the text you provide us with. Placement will be as described in the help text.
Can I send you my old stove and have it engraved?
No, unfortunately that is not possible at the moment.
What type of engraving is it?
We use laser engraving (fiber laser). It gives a high-quality and durable result.
