Transferpak mod and Loader-App

[Snugglevixen]

Would it be possible to play on a non modified transfer pak by only having one game on the cart?
With my EMS SmartCard, if you only write one game to the cart's flash memory, that's what the transfer pak picks up. Problem is I'm getting ramdom errors with Pokemon and I think it's because the Smart Card doesn't support MBC3 so I was wondering if I could use an Everdrive the same way I use my Smart Card.

[saturnu]

no, the edgb isn't working like that at the moment

[MockyLock]

I do like when saturnu add "at the moment" when a feature doesn't exist...

[Snugglevixen]

no, the edgb isn't working like that at the moment

Would it be possible to delete EDGB's menu and put the GB rom in it's place?

[saturnu]

no ^^ the menu is needed to set the cart in the correct mapper mode

[Nubcake]

is it necessary to solder a switch or no?

and it's working with Pokemon Stadium 1 and 2 or just 1?

thanks

[saturnu]

it's working with both and a switch isn't neccessary

[Localhorst86]

Hey there

I tried using gb64_v06_beta_cam_write.zip to back up my Gameboy camera SRAM, but the tool always tells me I need to check the connection. Other Gameboy games work fine, do I need to bridge the connections for the GB camera as well?

[saturnu]

no it should work without a modification.
try to clean the contacts with some isopropyl alcohol. ^^

[Localhorst86]

no it should work without a modification.
try to clean the contacts with some isopropyl alcohol. ^^

Well, actually  cleaning the contacts didn't help, but I got it to work. I have to run the GB64.z64 file once, it'll then tell me to check the connection. I then have to press reset and run the program a second time and then it'll recognize the camera.

Do you know what could be causing this issue?

EDIT: I mean, it's not a big issue, now I know. But it'd be interesting to know what's causing this.

[saturnu]

yes it IS interesting, thanks for the note ^^
maybe there are some timing errors inside the program. ^^

[Localhorst86]

I assume there is no way we can use this with retail versions of Pokemon Stadium, correct? I am asking because I have an EDGB 2.5 and Pokemon Stadium 2 always crashes when entering the main menu because of ED64 corrupting the last 128(?) kb of the game rom.

[saturnu]

in theory, you could put two aa batteries in series (~3v) in parallel to the input side of the step up circuit while swapping the cartridge. :>
or you could ask krikzz if he is going to implement a splitted FlashRAM mapper fГѓВјr PokeStdm2, which is putting the savegame to a few free locations inside the rom. ^^

[dreimer]

OK, maybe I just am too stupid to understand the howto, but... Which wires should I connect now with which? First I understood to use one of the one on the 3.3V side (red) and connect it to 5V (yellow), then I understood that both red have to be connected to 5V and now I think I just need to connect the two red ones.. The further I progresses this post, the less sure I was I am right with my assumption ^^ HAAAALP!

[saturnu]

connect the two purple marked joints. ^^