Customizable Vtuber Model By Suiika (1)
-
wrote on Aug 7, 2025, 12:35 PM last edited by
Thank you for updating!
-
1.05 update
Enjoy https://workupload.com/file/PKkLaTxUaWEedit: to turn off the watermark go into customise art meshes and turn the opacity off face_skin2 and face_skin4
wrote on Aug 9, 2025, 6:49 AM last edited by@ziptagbun Where would the Customize Art Meshes be? Would it be in Vtube Studio?
-
@ziptagbun Where would the Customize Art Meshes be? Would it be in Vtube Studio?
wrote on Aug 10, 2025, 4:20 AM last edited by@Meowmeow1369 its the texture files
-
wrote on Aug 10, 2025, 4:43 AM last edited by
@Meowmeow1369 enter vtube studio, double click the cog icon, go to the person icon, go down to customize model.
-
10 days later
-
i figured it out. when in vtube studio go to the customize model and turn the opacity of face_skin2 and face_skin4 off. idk if that's how its intended to be turned off but it worked.
-
wrote on Aug 21, 2025, 3:37 AM last edited by
@Narceja you have to find the layer and recolor it if you know how to do that
-
13 days later
-
wrote on Sep 3, 2025, 10:15 AM last edited by
Thank you for the update!!
-
28 days later
-
i figured it out. when in vtube studio go to the customize model and turn the opacity of face_skin2 and face_skin4 off. idk if that's how its intended to be turned off but it worked.
-
11 days later
-
wrote 30 days ago last edited by
PLEASE READ!
Due to the fact that many posts have been deleted and the information is all over the place, I am taking all the information and condensing it all into 1 post.
-
Download Customizable Vtuber Model By Suiika v1.05 here:
-
The ZIP file contains more ZIP files inside it so unzip the version you prefer and put it into the avatar folder for VTube Studio. (I suggest version B with resolution B2 as version A will not be supported in future updates and version C is just the head, also the 2k resolution is perfectly fine even if you zoom very close.)
-
Open VTube Studio and load the version of the avatar that you installed.
-
(This is the technical part) After the avatar is loaded you will see the watermark over the face, this watermark is actually 2 ArtMesh layers. Click the gear icon on the left of the screen. At the top click the icon that looks like a person with a gear next to its head.
-
On the right side of the screen click the button that says "Customize Model".
-
A list will pop up, this is the part that wasn't fully explained in all the other posts, click the button that says "Customize multiply/screen color for ArtMeshes" and then click Select. (Have patience, it will take a moment for it to load all the ArtMesh layers.)
-
There will be a lot of layers, don't be intimidated, just scroll straight to the bottom of the list and you will see the layers "face_skin2" and "face_skin4", these are the ones that represent the watermark, one is the words and the other is the translucent background for it. These are what we will be working with.
-
Toggle those 2 layers ON then click them to edit the properties. A window will pop up, the first is the Multiply window. Don't worry about all the options just go to the one labeled "A" slide it all the way to the left, that makes it invisible then click OK. The next window that pops up will be the Screen window, ignore all the other options, slide the one labelled "V" all the way up to pure white then hit OK. Then the window will close. Do this for both of the ArtMesh layers.
-
Now you are done, both watermark layers are invisible and now you can just follow the manual for further customizations.
-
I hope this made it easer for everyone. Have FUN!
-
-
11 days later
-
PLEASE READ!
Due to the fact that many posts have been deleted and the information is all over the place, I am taking all the information and condensing it all into 1 post.
-
Download Customizable Vtuber Model By Suiika v1.05 here:
-
The ZIP file contains more ZIP files inside it so unzip the version you prefer and put it into the avatar folder for VTube Studio. (I suggest version B with resolution B2 as version A will not be supported in future updates and version C is just the head, also the 2k resolution is perfectly fine even if you zoom very close.)
-
Open VTube Studio and load the version of the avatar that you installed.
-
(This is the technical part) After the avatar is loaded you will see the watermark over the face, this watermark is actually 2 ArtMesh layers. Click the gear icon on the left of the screen. At the top click the icon that looks like a person with a gear next to its head.
-
On the right side of the screen click the button that says "Customize Model".
-
A list will pop up, this is the part that wasn't fully explained in all the other posts, click the button that says "Customize multiply/screen color for ArtMeshes" and then click Select. (Have patience, it will take a moment for it to load all the ArtMesh layers.)
-
There will be a lot of layers, don't be intimidated, just scroll straight to the bottom of the list and you will see the layers "face_skin2" and "face_skin4", these are the ones that represent the watermark, one is the words and the other is the translucent background for it. These are what we will be working with.
-
Toggle those 2 layers ON then click them to edit the properties. A window will pop up, the first is the Multiply window. Don't worry about all the options just go to the one labeled "A" slide it all the way to the left, that makes it invisible then click OK. The next window that pops up will be the Screen window, ignore all the other options, slide the one labelled "V" all the way up to pure white then hit OK. Then the window will close. Do this for both of the ArtMesh layers.
-
Now you are done, both watermark layers are invisible and now you can just follow the manual for further customizations.
-
I hope this made it easer for everyone. Have FUN!
wrote 19 days ago last edited byThis post is deleted! -
