Introducing the "Wireless Pro" ultra-compact wireless microphone from Road Microphones.
With a transmission distance of up to 260 m (perspective) of up to 40 hours of onboard recording with 32-bit float, seamless synchronization of audio and video with time code output, and a locking connector for the labelia microphone terminal, this product is useful in professional situations where high sound quality recording is not only a flexible and reliable production flow.
It also has a gain assist function that automatically adjusts to the optimal volume at all times, so you can record audio that is easy for anyone to listen easily without having to adjust fine gains.

The Wireless Pro is packed in a compact body with many features to bring new possibilities to your footage creation.

Advanced Wireless Microphone System
The Wireless Pro is a dual channel wireless microphone system with two transmitters with built-in microphone and one receiver that connects to your shooting device. The sound of the speaker's hands is clear and can be easily achieved for high-quality recordings without being tied to the troublesome audio cables. The transmission between transmitter and receiver, adopts RØDE state-of-the-art series IV 2.4GHz digital transmission and near-zero latency codec with 128-bit encryption to provide clear and stable audio transmission up to 260m (perspective)
Recording mode allows you to select a merge mode that records the output from the two transmitters together and split mode to record the output of each transmitter in separate channels It is also compatible with the "Wireless Go II" and "Wireless Me" which uses the same series digital transmission, so you can change and pair each combination of transmitter and receiver. It can also be connected to the RØDE Audio Interface Products "Road Caster Pro II", "Road Caster Duo" and "Streamer X".
Both transmitter and receiver can run for up to 7 hours, and you can check the remaining battery and transmission status of the transmitter via the LCD monitor on the receiver.

You can record 32-bit float onboard sound without cracking.
Each transmitter is equipped with 32 GB internal memory, allowing you to record audio while transmitting audio to the receiver.
In addition, onboard recording supports 32bit float recording*
No need for gain adjustment during recording, and the gain can be adjusted by editing after recording, so you can easily avoid sound cracks.
Onboard recording can be switched between either mode (all ways) that is always recording during startup or manual) to start recording by pressing the REC button on the transmitter.
Even when not connected to the receiver, it can store more than 40 hours of recorded data in the internal memory on 32bit float, which is convenient for backup in case of faulty audio transmission.
* The digital output of the receiver is not compatible with 32bit float.

Easily record clear in any situation
In addition to 32-bit float onboard recording, it also features "gain assist function" and "safety channel function". The gain assist function automatically adjusts the input gain to the proper size, so loud audio is small, small and small voice is louder and easy to read audio at any time.
The output gain from the 3.5 mm TRS terminal can be manually adjusted by 3 dB increments, and there is also a preset of gain settings that match the camera and so on, so you can easily manage the proper gain.
Safety Channel Function* outputs all input audio from the right channel with -10dB lower backup sound In case of sudden loud or unexpected noise, you can avoid trouble caused by sound cracking by using the backup sound source during editing.
*Only available in Merged Mode

Time code output for smooth Posspro work
The time code output from the receiver makes it easy to sync audio and video in an editing flow. The 3.5 mm TRS and USB-C terminals allow you to output the time code as an audio signal via LTC format, so it is compatible with devices that support time codes, as well as devices that cannot store time codes in metadata, such as mirrorless digital cameras. You can choose from 5 patterns to assign output audio and time code to the LR of each terminal, and you can also jam sync multiple devices by only using time codes.
Of course, the time code is synchronized to the transmitter.
If the receiver runs out of connection, the time code of the transmitter will remain free run, so it will automatically sync when reconnected.
*It cannot record in split mode when time code output

Connects to a variety of devices
The 3.5mm TRS cable connects the receiver (RX) to your camera and includes a USB-C cable and Lightning cable that you need to digitally connect to your PC or smartphone.
For example, even in a webiner or online meeting, you can distribute clear voice with the gain assist function that adjusts to the appropriate volume without worrying about the cable length when connected to your PC.
In addition to using the camera app that supports external audio input, you can use wireless pros with the camera app "RØDE Capture" for more convenience. The RØDE Capture allows you to change the wireless pro settings from within the app, as well as simultaneous recording of the main and in-camera.
Other apps such as RØDE Central allow you to change different settings that cannot only be performed by wireless pros.
In addition, the 3.5mm TRRS terminal on the receiver (RX) allows you to connect the headset, and you can also monitor voice from the transmitter (TX), as well as add 3 channels of input audio from the headset.
*For some Android devices, the standard camera app may not support external audio input. Compatibility status varies by model, so please check by model

All you need for wireless recording in one
The package contains a large variety of accessories, allowing you to run wireless pros in a variety of recording scenes and recording styles.
In addition to the transmitter and receiver itself, it also includes a charging and communication case for the main unit, a magnetic clip, 2 labellia mics, a connecting cable compatible with various devices, and a case for storing accessories.
Charging Communication Case Pro is a storage case with a built-in battery that can fully charge the transmitter or receiver up to 2 times, so you can safely carry the transmitter and receiver in one place. In addition, it is not only chargeable but also wired communication with your PC, so you can easily change the settings and perform data output from onboard recording in the case. The Laberia microphone "Laberia II" is compatible with locking connectors that prevent cable from dropping, making it useful for situations where you want clear sound while keeping the microphone out of sight. It also comes with a windshield for the Laberia II so you can use it outdoors without worry.

Transmitter (TX) Size: H 0.8 x W 1.7 x D 1.8 inches (2 x 4.4 x 4.6 cm).
Receiver (RX) Size (H x W x D): 0.8 x 1.7 x 1.8 inches (2 x 4.4 x 4.6 cm).
Charging Case Pro Size: H 3.2 x W 4.0 x D 2.8 inches (8.2 x 10.1 x 7 cm).
Weight Transmitter (TX): 1.3 oz (35 g), Receiver (RX): 1.2 oz (36 g), Charge Case Pro: 6.1 oz (177 g) (Case only)
Transmitting and receiving frequency: 2.4GHz
Transmission distance: About 260 m (sight)
Time code standard: SMPTE
Time Code Format: LTC
Time Code Frame Rate: 23.98 fps, 24 fps, 25 fps, 29.97 fps, 29.97 fps, 30 fps
Battery life time: up to 7 hours
Power Supply: Built-in lithium-ion battery (can be charged via USB-C terminal (5V/0.4A)
System Requirements: MacOS 10.15 or later, Windows 10 or later, iOS 14 or later, Android 11 or above
Supports RØDE App: RØDE Central, RØDE Connect, UNIFY, RØDE Central Mobile, RØDE Reporter, RØDE Capture
Transmitter format (built-in mic): condenser (pre-polarized)
Transmitter Polar Pattern (Built-in Microphone): Omnidirectional
Transmitter Frequency Characteristics (Built-in Microphone): 20Hz-20kHz
Transmitter Maximum Input Sound Pressure (Built-in Microphon): 123.5 dB SPL
Transmitter Equal Noise Level (Built-in Microphon): 22dBA
Transmitter S/N ratio (built-in microphone): 72dB
Transmitter Analog Input Terminal: 3.5mm TRS Locking Connector
Transmitter Internal Memory Capacity: 32GB
Transmitter bit depth (onboard recording): 32bit float
Transmitter Sample Rate (onboard recording): 48kHz
Transmitter; PC Connection: USB-C
Receiver Analog Output: 0.1 inch (3.5 mm) TRRS (supports 3.5 mm) TRS output).
Receiver Analog Input: 3.5mm TRRS
Receiver Digital Output: USB-C
Charge Case Pro Battery Capacity: 4,200 mAh (2 full charges of transmitter and receiver)
Charge Case Pro Power Supply: 5V/3A (USB-C connection)
Charging Case Pro Charging Time: Approx. 2.5 hours
Charging Case Pro Charging Current: 2A (max)
Includes: 2 x Transmitter, 1 x Receiver (RX), 1 x Charge Case Pro, 1 x SC2 (3.5mm TRS to TRS cable, 1 x SC21 (USB-C to Lightning cable), 1 x SC22 (USB-C to USB-C cable), 1 x USB-C to USB-C Super Speed Cable, 2 x MagClip Go, 3 x Windshields (Wireless Professional), 2 x Lavelia II. For Laberia II x 2, Microphone Clip (for Laberia II) x 2, Mini Fur Windshield (for Laberia II) x 2, Accessory Case x 1.

About warranty and repair service ※
Only genuine distribution products are covered for Japanese warranty and repair services.
Please note that parallel import goods except Japanese authorized dealers are not covered under domestic warranty and repairs.
In addition, Japanese genuine products are labeled on the product packaging with a label that says "Domestic regular distribution goods."
Please be careful when purchasing and if you have any questions, please contact the seller in advance.