Outvoke

Outvoke serves as a library, a framework, and an internal DSL simultaneously.

If you need Japanese Edition of this README, see README.ja.md (←日本語版README)

CAUTION

The author, cleemy desu wayo, has tested Outvoke only on Linux.

The first official release, version 0.1, is probably planned for 2026. Version 0.1 focuses on demonstrating the concept, so performance may be limited.

Current versions available as of summer 2025 (e.g., 0.0.99.x) are experimental.

Until version 0.1 is released, specifications may change without notice and features may be removed suddenly.

Requirements

• Ruby 3.0 or later

Overview

Outvoke makes it easy to write code that hooks into flowing data streams.

Because it is an internal DSL, all of the features of Ruby are available.

Outvoke is an internal DSL in Ruby, and is basically for people who want to write code in Ruby. However, you may be able to use it practically without going into the linguistic details of Ruby.

Even if Outvoke has some parts that could be called "DSL within a DSL", Outvoke is basically not doing its own parsing, etc. In code that uses Outvoke, code that looks like Ruby is simply Ruby code. In some cases, code may not appear Ruby-like due to its nature as an internal DSL, but that is what an internal DSL is.

Outvoke works both as a library and as a stand-alone command. This README contains a lot of sample code (one-liners) when used as a stand-alone command.

This README does not describe the design philosophy.

The following article, written in Japanese and published in June 2025, is the only cohesive explanation by the author personally as of July 2025, but it covers only a small portion of the functionality.

• Outvokeのことを、なんと説明すればいいだろう｜cleemy desu wayo (2025-06-28)
  https://note.com/cleemy/n/n01ae9d0583a7

Until version 0.1 is released, the author plan to write Outvoke itself and sample code without using generative AI. However, generative AI is used for translating Japanese content into English, including this README.

The code under samples/ in the repository is merely sample code.

Setup

Put outvoke.rb in the current directory and give it execute permission.

Start it using the -e option as follows, and if you see output every 5 seconds, it is running for now.

$ ./outvoke.rb -e 'hook "every-sec", /..:..:.[05]/'
# starting Outvoke 0.1 (version 0.0.99.20240928) ---- 2024-11-03 17:16:37 +0900
# ----
# given ruby code:
# hook "every-sec", /..:..:.[05]/
# ----

[2024-11-03 17:16:37 +0900] [outvoke-system] vrchat-001: a new log file was found.
[2024-11-03 17:16:38 +0900] [outvoke-system] vrchat-001: first time log check has done.
[2024-11-03 17:16:40 +0900] 2024-11-03 17:16:40 +0900
[2024-11-03 17:16:45 +0900] 2024-11-03 17:16:45 +0900
[2024-11-03 17:16:50 +0900] 2024-11-03 17:16:50 +0900
[2024-11-03 17:16:55 +0900] 2024-11-03 17:16:55 +0900
[2024-11-03 17:17:00 +0900] 2024-11-03 17:17:00 +0900
[2024-11-03 17:17:05 +0900] 2024-11-03 17:17:05 +0900

To exit, press Ctrl + C.

There may be error lines if VRChat is not installed or the log files are in a different location.

If you have VRChat installed and it has been a long time since VRChat was started, it may take a long time after Outvoke is started before you see the first time log check has been done. This time can be shortened by restarting VRChat.

Config File

If there is a file outvoke.conf.rb in the current directory, Outvoke will first include that file.

For example, if you have a line like the following in outvoke.conf.rb, you can specify the directory for VRChat log files to look for.

$outvoke["vrchat-001"].log_dir = "#{Dir.home}/.steam/debian-installation/steamapps/compatdata/438100/pfx/drive_c/users/steamuser/AppData/LocalLow/VRChat/VRChat"

In version 0.0.99.20241125 or earlier, it was necessary to specify it as follows:

$outvoke.ds["vrchat-001"].log_dir = "..."

In even older versions, you would have had to do like this:

$outvoke.sources["vrchat-001"].log_dir = "..."

Basic Usage

When you run Outvoke with no arguments, it looks for main.rb in the current directory and includes it.

If you run Outvoke by specifying a file name as shown below, it will look for test.rb in the current directory and include it.

$ ./outvoke.rb test.rb

You can write a one-liner using the -e option.

For the sake of clarity, this section assumes that you are writing in main.rb.

If you write using OutvokeDSL at the beginning of main.rb, you will be in the mode of internal DSL. In the internal DSL mode, you can write it as casually as writing a configuration file.

Since main.rb is interpreted as a Ruby script, you can write complex programs.

The following is an example of main.rb.

using OutvokeDSL

hook 'every-sec', /22:08:00/

The 'every-sec' part specifies the name of the data source. The /22:08:00/ part specifies the condition.

Leave it alone after executing Outvoke, and at 10:08 PM, a line that looks like the following should be output.

[2024-11-03 22:08:00 +0900] 2024-11-03 22:08:00 +0900

Try changing the /22:08:00/ part to suit your environment.

For the third line with hook, it is equivalent to writing:

hook 'every-sec', /22:08:00/ do |e|
  e.body
end

Here is another example.

using OutvokeDSL

hook 'every-sec', /05:00:00/ do
  spawn 'play', '-q', '-t', 'wav', '-v', '0.6', 'ring.wav', 'repeat', '50'
end

At 5:00 AM, ring.wav in the current directory is played by the play command.

Here is an example of treating multiple data sources:

using OutvokeDSL

hook 'every-sec', /..:..:.[02468]/ do |e|
  "every-sec: #{e.body}"
end

hook 'stdin' do |e|
  "stdin: #{e.body}"
end

After preparing the above main.rb, run it as follows:

$ { sleep 5 ; echo aaa ; sleep 5 ; echo bbb ; sleep 5 ; echo ccc ; } | ./outvoke.rb

And you should get output like this:

# starting Outvoke 0.1 (version 0.0.99.20240928) ---- 2024-11-03 16:06:22 +0900
# ----
# loading ./main.rb ...
# ----

[2024-11-03 16:06:22 +0900] [outvoke-system] vrchat-001: a new log file was found.
[2024-11-03 16:06:22 +0900] [outvoke-system] vrchat-001: first time log check has done.
[2024-11-03 16:06:24 +0900] every-sec: 2024-11-03 16:06:24 +0900
[2024-11-03 16:06:26 +0900] every-sec: 2024-11-03 16:06:26 +0900
[2024-11-03 16:06:27 +0900] stdin: aaa
[2024-11-03 16:06:28 +0900] every-sec: 2024-11-03 16:06:28 +0900
[2024-11-03 16:06:30 +0900] every-sec: 2024-11-03 16:06:30 +0900
[2024-11-03 16:06:32 +0900] stdin: bbb
[2024-11-03 16:06:32 +0900] every-sec: 2024-11-03 16:06:32 +0900
[2024-11-03 16:06:34 +0900] every-sec: 2024-11-03 16:06:34 +0900
[2024-11-03 16:06:36 +0900] every-sec: 2024-11-03 16:06:36 +0900
[2024-11-03 16:06:37 +0900] stdin: ccc
[2024-11-03 16:06:38 +0900] every-sec: 2024-11-03 16:06:38 +0900
[2024-11-03 16:06:40 +0900] every-sec: 2024-11-03 16:06:40 +0900
[2024-11-03 16:06:42 +0900] every-sec: 2024-11-03 16:06:42 +0900
[2024-11-03 16:06:44 +0900] every-sec: 2024-11-03 16:06:44 +0900
[2024-11-03 16:06:46 +0900] every-sec: 2024-11-03 16:06:46 +0900
[2024-11-03 16:06:48 +0900] every-sec: 2024-11-03 16:06:48 +0900

In this example, it helps to think of it like grep with multiple input streams.

If that helps, it is possible to make Outvoke work like grep by using the -q option.

$ seq 10 20 | grep 2
12
20
$ seq 10 20 | ./outvoke.rb -q -e 'hook "stdin", /2/'
12
20

Currently Outvoke does not automatically terminate when EOF arrives.

If you use the data source stdin, please use version 0.0.99.20240928 or later of outvoke.rb.

With VRChat

In addition to every-sec and stdin, Outvoke has a built-in data source vrchat-001.

The data source vrchat-001 monitors the log file output by the VRChat client and treats it as like an input stream. This data source only watches the log files output by the VRChat client, so just using it normally does not constitute cheating.

Some explanations and samples may be found at the following:

• [cdwact-2023-12] https://note.com/cleemy/n/nf9ea83c0c5e3
• [cdwact-2024-01] https://note.com/cleemy/n/n4ceff128e355
• [cdwact-2024-04] https://note.com/cleemy/n/nf7cce0493fc0

Also see the samples below.

• samples/vrchat_join_log2.rb (entry and exit history)
• samples/vrchat_join_log3.rb (entry and exit history, with user ID)
• samples/2024/vrchat_waittest1.rb (pickup and change the interval)
• samples/2024/vrchat_waittest2.rb (pickup and change the interval)
• samples/2024/vrchat_get_log_file_name.rb (usage of e.status)
• samples/2024/vrchat_multiple_ds1.rb (handling multiple data sources)
• samples/2024/vrchat_multiple_ds2.rb (writing an own data source)
• samples/2024/vrchat_loputs.rb (basic usage of lo and loputs)
• samples/2024/webrick_vrchat_instanceinfo.rb (deliver JSON data about the instance you are in)
• samples/2024/webrick_vrchat_instanceinfo.html (SPA, for how to get it to work, see here)

Videos and Images of Outvoke running in action

• samples/2025/vrchat_osc_send2.rb alongside OSC message-sending one-liner demos (video): https://x.com/metanagi/status/1944847364961001921
• samples/2024/vrchat_multiple_ds2.rb in action (video): https://x.com/metanagi/status/1802512101111689368
• samples/2024/webrick_vrchat_instanceinfo.html in action (screenshot): https://cleemy-desu-wayo.gitlab.io/ov/docs/about_webrick_vrchat_instanceinfo_img001.png

(The rest is currently being written)

One-liner examples

Even with one-liners, basically all of Ruby's features are available.

Some of the samples provided in this README play the sound. Before you run them, you'll need the following:

1. Put outvoke.rb to the current directory

2. Set up maoudamashii-se-system47.wav to the current directory

(download a wav file from https://maou.audio/se_system47/ )

3. Check to see if sound is played by the play command

$ play maoudamashii-se-system47.wav

4. Put outvoke.conf.rb to the current directory with the following contents

def ring(vol = "0.05")
  spawn "play", "-v", vol.to_s, "-q", "maoudamashii-se-system47.wav", :err=>"/dev/null"
  nil
end

5. Check to see if the sound is played once per second with the following one-liner

$ ./outvoke.rb -e 'hook "every-sec", /./ do ring ; end'

In version 0.0.99.20240818 or later, the following is also possible:

$ ./outvoke.rb -e 'hook "every-sec" do ring ; end'

You can also write as follows:

$ ./outvoke.rb -e 'hook("every-sec"){ring}'

In version 0.0.99.20241110 or later, you can also write as follows:

$ ./outvoke.rb -e 'hooksec{ring}'

Notes on the one-liners presented here

These one-liners make heavy use of _1 (numbered parameter).

$ ./outvoke.rb -e 'hookvr(/pickup object/i){puts _1.body}'

The above is the same as:

$ ./outvoke.rb -e 'hookvr(/pickup object/i){|e| puts e.body}'

As of November 2024, hook "vrchat-001" is the same as hookvr, but these one-liners dare not use hookvr.

Slightly complicated alarm clock one-lilners

Now, here are a number of one-liner examples.

Sound three times every 10 seconds between 5:00 AM and 05:10 AM:

$ ./outvoke.rb -e 'hook("every-sec", / 05:0[0-9]:[0-5][036]/){ring}'

Play the video once every 5 minutes between 05:00 AM and 05:55 AM:

$ ./outvoke.rb -e 'hook("every-sec", / 05:[0-5][05]:00/) {spawn "mpv", "https://www.youtube.com/watch?v=dQw4w9WgXcQ", "--really-quiet", :err=>"/dev/null"}'

At 22:48, start looping "Hotaru no Hikari" and end at 23:05:

$ ./outvoke.rb -e 'hook("every-sec", / 22:48:00/) {spawn "mpv", "https://www.youtube.com/watch?v=OgYWssWn7uQ", "--really-quiet", "--loop", :err=>"/dev/null"} ; hook("every-sec", / 23:05:00/) {spawn "pkill", "mpv", :err=>"/dev/null"}'

looping of "Hotaru no Hikari", version that ends after 17 minutes instead of specifying an end time:

$ ./outvoke.rb -e 'hook("every-sec", / 22:48:00/) {spawn "mpv", "https://www.youtube.com/watch?v=OgYWssWn7uQ", "--really-quiet", "--loop", :err=>"/dev/null" ; sleep 60 * 17 ; spawn "pkill", "mpv", :err=>"/dev/null"}'

Note that in these examples, pkill mpv will terminate all mpv.

Kernel.#spawn returns PID. PID can be memorized so it's possible to terminate the mpv with pinpoint accuracy:

$ ./outvoke.rb -e 'mpv_pid = nil; hook("every-sec", / 22:48:00/) {mpv_pid = spawn "mpv", "https://www.youtube.com/watch?v=OgYWssWn7uQ", "--really-quiet", "--loop", :err=>"/dev/null"} ; hook("every-sec", / 23:05:00/) {spawn "kill", mpv_pid.to_s, :err=>"/dev/null" if mpv_pid}'

looping of "Hotaru no Hikari", life-and-death monitoring version:

$ ./outvoke.rb -e 'is_music_on = false; hook("every-sec", / 22:48:00/) {is_music_on = true} ; hook("every-sec") {next if (not is_music_on) || IO.popen( "ps aux | grep [O]gYWssWn7uQ").to_a.length != 0 ; spawn "mpv", "https://www.youtube.com/watch?v=O" + "gYWssWn7uQ", "--really-quiet", "--loop", :err=>"/dev/null" ; sleep 0.5 } ; hook("every-sec", / 23:05:00/) {is_music_on = false; spawn "pkill", "mpv", :err=>"/dev/null"}'

When 22:48 is reached, just set a flag and then it will start life-and-death monitoring every other second and execute mpv. If you exit mpv by mistake, it will immediately start playing again.

The downside of the one-liner is that the entire source code will be included in the output of ps aux. Muddy ingenuity may be required to life-and-death monitoring of the process with ps aux. For a case as complex as this, it is better to prepare a file instead of a one-liner.

See also sample samples/2024/loputs_hotaru_no_hikari.rb which does something similar. This uses Process.#detach and Process.#kill.

And now, let's think about the days of the week.

Sound at exactly 05:00 AM, but only between Monday and Friday:

$ ./outvoke.rb -e 'hook("every-sec", / 05:00:00/){ring if (1..5).include?(Time.now.wday)}'

Instead of Time.now, you can also use _1.status.now:

$ ./outvoke.rb -e 'hook("every-sec", / 05:00:00/){ring if (1..5).include?(_1.status.now.wday)}'

In these examples, either is fine, but you should be aware that Time.now attempts to get the current time every time it is evaluated, so the date may end up being the next day.

As a general Ruby topic, include? can handle days of the week well. For example, whether it falls on Monday, Wednesday, or Friday can be written as follows:

[1,3,5].include?(Time.now.wday)

simple VRChat-related one-liners

From here, I will present a number of samples related to VRChat.

Play a sound when someone joins:

$ ./outvoke.rb -e 'hook("vrchat-001", /onplayerjoincomplete/i){ring}'

/onplayerjoined/i is not recommended.

Play a sound when you pick up an object:

$ ./outvoke.rb -e 'hook("vrchat-001", /pickup object/i){ring}'

Display all video-related logs at all:

$ ./outvoke.rb -e 'hook "vrchat-001", /(resolv|video)/i'

If you write "resolv", it will match both "resolve" and "resolving".

Display all TopazChat-related logs at all:

$ ./outvoke.rb -e 'hook "vrchat-001", /(rtsp|topaz)/i'

Slightly complicated VRChat-related one-liners

Play a sound when someone joins, but no ringing for 90 seconds after you join:

$ ./outvoke.rb -e 'hook("vrchat-001", /onplayerjoincomplete/i) {ring if _1.status.elapsed > 90}'

You can get the elapsed time since you joined by _1.status.elapsed.

This will prevent unnecessary noise immediately after you join an instance with a large number of people.

When you want to output string even without sound:

$ ./outvoke.rb -e 'hook("vrchat-001", /onplayerjoincomplete/i) {ring if _1.status.elapsed > 90 ; _1.body}'

If you want to output _1.body, you can actually use true:

$ ./outvoke.rb -e 'hook("vrchat-001", /onplayerjoincomplete/i) {ring if _1.status.elapsed > 90 ; true}'

Using 1 instead of true, for example, is not recommended. It may result in different behavior in the future due to changes in the Outvoke specification. (NOTE: In commit 04be13b4, that change was indeed made)

Whenever a video starts playing in the world, play that video in mpv:

$ ./outvoke.rb -e 'hook("vrchat-001", /video playback.*resolve url..(https[-_.a-zA-Z0-9&=?%:\/]*)/i) {spawn "mpv", _1.m[1], "--really-quiet", :err=>"/dev/null"; _1.m[1]}'

If an error occurs in a video player in the world, mpv may start multiple times due to retries.

If you dynamically change the arguments passed to Kernel.#spawn, you should be aware of the security risks. Avoid passing the entire OS command line as a single string.

$ ruby -e 's = "aaa;date" ; spawn "echo", s'
aaa;date
$ ruby -e 's = "aaa;date" ; spawn "echo #{s}"'
aaa
Sat Aug 24 18:30:35 JST 2024
$ ruby -e 's = "aaa\";date;#" ; spawn "echo \"#{s}\""'
aaa
Sat Aug 24 18:30:38 JST 2024

Every time a video starts playing in the world, output the URL and title:

$ ./outvoke.rb -e 'hookcc("vrchat-001", /video playback.*resolve url..(https[-_.a-zA-Z0-9&=?%:\/]*)/i) {title = IO.popen(["./yt-dlp_linux", "-q", "--get-title", _1.m[1], :err=>"/dev/null"]).each_line.first; loputs "#{_1.m[1]} -- #{title}"} ; hooklo'

For information on hookcc and multi-threading, see samples/2024/vrchat_loputs.rb and samples/2024/vrchat_loputs_hookcc.rb.

yt-dlp_linux is a binary of yt-dlp for Linux. The latest version is available from https://github.com/yt-dlp/yt-dlp/releases/.

If you want to know how long it takes to get the title by yt-dlp, you may also do loputs at the beginning of the block as follows:

$ ./outvoke.rb -e 'hookcc("vrchat-001", /video playback.*resolve url..(https[-_.a-zA-Z0-9&=?%:\/]*)/i) {loputs "#{_1.m[1]} -- hookcc start" ; title = IO.popen(["./yt-dlp_linux", "-q", "--get-title", _1.m[1], :err=>"/dev/null"]).each_line.first; loputs "#{_1.m[1]} -- #{title}"} ; hooklo'

Dynamically changing the arguments passed to IO.popen has also a security risk. Avoid passing the entire OS command line as a single string. And you should also be cautious about using Kernel.#` or %x for security reasons.

(More and more samples to be added)

About tee command

Although not directly related to Outvoke, it is useful in combination with the tee command if you want to output strings to the terminal while keeping a record of it.

$ ./outvoke.rb vrchat_join_log3.rb | tee join_history_$(date "+%Y-%m-%d_%H-%M-%S").txt

Of course, it can also be used in one-liner mode.

$ ./outvoke.rb -e 'hookcc("vrchat-001", /video playback.*resolve url..(https[-_.a-zA-Z0-9&=?%:\/]*)/i) {title = IO.popen(["./yt-dlp_linux", "-q", "--get-title", _1.m[1], :err=>"/dev/null"]).each_line.first; loputs "#{_1.m[1]} -- #{title}"} ; hooklo' | tee video_history_$(date "+%Y-%m-%d_%H-%M-%S").txt

About options of mpv

In launching mpv from Outvoke, some useful mpv options to know are, for example:

• --fullscreen (full screen)
• --geometry= (position of window, --geometry=0:0 for upper left)
• --loop (looping)
• --no-audio (only video)
• --no-video (only audio)
• --no-keepaspect (not maintain aspect ratio)
• --no-osc (GUI disabled, this OSC is "On Screen Controller", not "OpenSound Control")
• --really-quiet (suppress unnecessary output)
• --volume= (volume setting, 100 is 100%)

It does not have to be mpv. VLC media player or firefox, chromium, or xdg-open as commands are also useful.