Tronxy X5SA Modifications

Thanks to leositu for the bracket and component cooler.
This is a collection of parts for modifications to the X5SA.
Installed a Volcano nozzle but continue to use the original cold end. To do this I modified the holder and cold end fan holder. 

From other things I changed parts or created parts myself:
Hotend holder (changed)
Sensor holder (changed)
Component cooling (changed)
Z-Syncronisation (created)
Power supply and control box holder (created)
Z-Emergency Stop (created)
bed distance (created)
SD card extension 35x11 mm holder (created)
Cable holder (created)
Roller protection corners (created)
Extruder holder (modified)
Bed chain holder (created)
Bed leveling knob 0.1/0.05 mm/prongs (modified)

Needed are:
1x toothed belt GT2x6x1210 (X5SA 400)
2x toothed belt pulley GT2x6 24Z D5 mm (X5SA 400)
2x toothed belt idler GT2x6 20Z D4 mm
1x tube 12x538 mm (X5SA 400)
1x LED strip 24V 10 mm 60LED/m
1x radial fan 5015
1x SD extension 500 mm
Screws Nuts Slotted nuts M5 M4 M3

Note: Drill 2.5 mm holes for M3 screw on "KaltEndeLuefterHalter", "ZNotStop" and "ZSyncSpanner" and screw in screw.
Scale the height of the "ZNotStop" as required.
This component cooler collides with the cable chain, so move the chain outwards and use the longer "BettKetteHalter".

Printed all the parts with PCTG.

I also recommend: Tronxy X5SA Sailfin Volcano Direct Extruder

https://www.printables.com/model/1027930-tronxy-x5sa-sailfin-volcano-direct-extruder

Changed and used things from:

Adjustable LED Strip Backets

https://www.thingiverse.com/thing:2207879

40mm Fan turbine cover with Dust Filter
https://www.thingiverse.com/thing:4395074

Fan Tronxy XY-2 x5sa x5s
https://www.thingiverse.com/thing:3663026

Cable Clips
https://www.thingiverse.com/thing:4050583

Nifty Clamp!
https://www.thingiverse.com/thing:4138158

Extruder Mount for 2020 Profile (Tronxy X5S)
https://www.thingiverse.com/thing:2633989

corner stiffening for 2020 V-Slot profile
https://www.thingiverse.com/thing:4903224

Bed Leveling Knob M3x0.5 pitch
https://www.thingiverse.com/thing:2853941

Original heat sink continues to be used.