(cache)klipper/config/printer-tronxy-x5sa-pro-2020.cfg at master · Klipper3d/klipper · GitHub

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
# This is a Klipper configuration for TronXY X5SA Pro CoreXY Printer
# 330x330x400 size with CXY-V6 motherboard, Tronxy blue self-levelling plate sensor
# and stock Titan Extruder Clone.

###########################################################
# CAUTION: The Touchscreen cannot be used with Klipper!!! #
# You will lose all the display functionalities!!! #
###########################################################

# === FLASHING WITH STOCK BOOTLOADER ===
# You should make firmware for STM32F103 with bootloader offset
# at 0x8008800 (Chitu v6 Bootloader) and serial (on USART1 PA10/PA9)
# communication.

# Use "./scripts/update_chitu.py ./out/klipper.bin ./out/update.cbd"
# after make to generate update.cbd. Put "update.cbd" file onto SD card,
# and reboot the printer.
# It will be automatically installed after you hear 2 beeps,
# and you will be able to update it this way.

# See docs/Config_Reference.md for a description of parameters.

[mcu]
serial: /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0
restart_method: command

[printer]
kinematics: corexy
max_velocity: 300
max_accel: 3000
max_z_velocity: 25
max_z_accel: 30

[stepper_x]
step_pin: PE5
dir_pin: !PE6
enable_pin: !PC13
microsteps: 32
rotation_distance: 40
endstop_pin: !PG10
position_endstop: -1
position_min: -1
position_max: 350 # for bed mesh
homing_speed: 50
homing_retract_dist: 10
second_homing_speed: 10.0

[stepper_y]
step_pin: PE2
dir_pin: !PE3
enable_pin: !PE4
microsteps: 32
rotation_distance: 40
endstop_pin: !PA12
position_endstop: 0
position_max: 330
homing_retract_dist: 10
homing_speed: 50.0
second_homing_speed: 10.0

[stepper_z]
step_pin: PB9
dir_pin: PE0
enable_pin: !PE1
microsteps: 32
rotation_distance: 8
endstop_pin: probe:z_virtual_endstop
position_max: 400
position_min: -2

[extruder]
step_pin: PB4
dir_pin: !PB5
enable_pin: !PB8
microsteps: 32
rotation_distance: 22.478 # Titan Extruder Clone Rotation Distance
gear_ratio: 66:22 # Titan Extruder Clone Gear Ratio
nozzle_diameter: 0.400
filament_diameter: 1.750
heater_pin: PG12
sensor_type: ATC Semitec 104GT-2
sensor_pin: PA1
control: pid
pid_Kp: 18.831
pid_Ki: 0.821
pid_Kd: 108.044
min_temp: 0
max_temp: 260
max_extrude_only_distance: 350

[heater_bed]
heater_pin: PG11
sensor_type: EPCOS 100K B57560G104F
sensor_pin: PA0
min_temp: 0
max_temp: 130
control: pid
pid_Kp: 73.932
pid_Ki: 1.521
pid_Kd: 898.279

[heater_fan hotend_fan]
pin: PG14

[fan]
pin: PG13

[controller_fan drivers_fan]
pin: PD6

[filament_switch_sensor filament_sensor]
pause_on_runout: True
runout_gcode:
M25
switch_pin: !PA15

[output_pin beeper]
pin: PB0

[safe_z_home]
home_xy_position: 165, 165
speed: 50
z_hop: 10
z_hop_speed: 5

[bed_screws]
screw1: 5, 5
screw2: 165, 5
screw3: 325, 5
screw4: 5, 325
screw5: 165, 325
screw6: 325, 325

[bed_mesh]
speed: 120
probe_count: 5, 5
horizontal_move_z: 5
algorithm: lagrange
mesh_min : 20, 20
mesh_max : 310, 310
mesh_pps: 0

[probe]
x_offset: -35
y_offset: 0
pin: !PG9
speed: 30
z_offset: 1