© 2024 EasyEDA Some rights reserved ISO/IEC
Editor Version ×
Standard 
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
Profession 
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
Completed
PRO CH335 HUB
License: GPL 3.0
Mode: Editors' pick
- 4
Update time： 2024-07-12 11:44:41
Creation time： 2023-07-14 19:57:40
Description
The controller chip is CH335F. Power of each port is controlled by CH217K. You may use uhubctl to control power of each port. So the power of each USB peripheral can be controlled by software.
R16 set the hub to work as Bus-powered. R15 set the hub to work as individual port control.
Note the hub will report as a 200mA device in bus-powered mode. So if the devices attached to hub require more than that, computer may refuse to initiate device. A EEPROM can be used to replace the 2 resistors to set all parameters in descriptor.
Here is also a 3D printed case for the board. The screw holes are designed to fit M3 counter-sunk machine screw. Depending on your machine accuracy, you may need to enlarge the hole with 2.5mm drill bit and tap M3 thread inside. Also the counter-sunk hole may need to be enlarged.
| No | Quantity | Device | Designator | Footprint | Value | Manufacturer Part | Manufacturer | Supplier Part | Supplier |
|---|---|---|---|---|---|---|---|---|---|
| 1 | 1 | CH335F-LBX | U1 | QFN-28_L4.0-W4.0-P0.40-TL | |||||
| 2 | 4 | CH217K | U2,U3,U4,U5 | SOT-23-6_L2.9-W1.6-P0.95-LS2.8-TL | |||||
| 3 | 2 | UB1112C-8FDE-4F | USB2,USB3 | USB-A-TH_UB1112C-8FDE-4F | UB1112C-8FDE-4F | FOXCONN(富士康) | C2761534 | LCSC | |
| 4 | 1 | SMD0805B050TF | F1 | F0805 | SMD0805B050TF | Brightking(君耀电子) | C269104 | LCSC | |
| 5 | 2 | CAP_0805 | C1,C3 | C0805 | 100nF | ||||
| 6 | 1 | CAP_0805 | C2 | C0805 | 10uF | ||||
| 7 | 1 | X322512MSB4SI | X1 | OSC-SMD_4P-L3.2-W2.5-BL | 12MHz | X322512MSB4SI | YXC(扬兴晶振) | C9002 | LCSC |
| 8 | 2 | CAP_0805 | C4,C5 | C0805 | 12pF | ||||
| 9 | 1 | Res_0805 | R1 | R0805 | DNP | ||||
| 10 | 1 | U217-041N-4BV81 | USB1 | USB-A-SMD_U217-041N-4BV81 | U217-041N-4BV81 | XKBConnectivity(中国星坤) | C319178 | LCSC | |
| 11 | 5 | Res_0805 | R2,R3,R4,R5,R6 | R0805 | 220 | ||||
| 12 | 4 | LED_0805-R | LED1,LED2,LED3,LED4 | LED_0805 | |||||
| 13 | 5 | LED_0805-G | LED5,LED6,LED7,LED8,LED9 | LED_0805 | |||||
| 14 | 4 | Res_0805 | R7,R9,R11,R13 | R0805 | 300K | ||||
| 15 | 4 | Res_0805 | R8,R10,R12,R14 | R0805 | DNP(56K) | ||||
| 16 | 6 | CAP_1206 | C6,C7,C8,C9,C10,C11 | C1206 | 100uF | ||||
| 17 | 2 | Res_0805 | R15,R16 | R0805 | 20K |
Unfold
Project Members
4
4Collect to album
Target complaint
Related Projects
Change a batch
Comment
Login or Register to add a comment
All Comments(0)
- Sort by time
- Sort by popularity
Grab the sofa~
Add to album ×
Loading...
reminder ×
Do you need to add this project to the album?