ASL vocabulary
Topic: mixture

I added hex holes to the original to avoid edge lift while printing in ABS.
Topics: throttle, mixture, DIY, thingiverse, stl, Cessna_172

Cessna 172 Mixture mount (guide) Update 28.02.2018 Replaced the mixture Guide with another one with hole diameter of 6.5mm Website: http://flyingforfun.weebly.com/cessna-172-cockpit.html
Topics: Cessna 172, cessna mixture, Other, thingiverse, flight simulator, knob, cessna cockpit, mixture,...

I made this box for hosting the Cessna 172 Throttle & Mixture controls for XPlane11 flight sim. Throttle and Mixture controls: I used SimVim plugin to hook up the controls to the sim. You can review the SimVim website https://simvim.com/svc_axis.html for build & connection details. Throttle and Mixture 3D prints are available here: https://www.thingiverse.com/thing:4548909 I used 100mm travel linear potentiometer to build the throttle and mixture controls with the 3D prints. Laser...
Topics: thingiverse, mixture, box, xplane, Cessna, Cessna_172, xplane11, stl, throttle, DIY

This is a mixture screw for a Keihin CVK-18 Z61E. But I think it should fit most CVK-18 carburetors. These types of carbs are mounted on the 2005 model Piaggio Fly with a 4-stroke engine with 2 valves. This is the old type of the Fly. So if you own one of those, this mixture screw should fit. I suggest you print this on an SLA or DLP printer at the finest resolution setting. I will be testing it shortly on a CVK-18 Z61E and CVK-18 Z61F and will report back here. Please correct me in the...
Topics: stl, Automotive, screw, thingiverse, carburetor, fuel_air_mixture, mixture

When my tomos A35 engine is cold is doesn't as good as normally when stationary, not very strange though. But sometimes you must adjust your mixture screw to keep the engine running in idle mode and have no tools at hand. This is for those moments, no more botching with keys, instead with a keychain you can always carry with you. Photos will follow soon.
Topics: stl, carb, key ring, driving, gas, stagnant, driver, on the road, thingiverse, portable, key chain,...

This is a standalone adaptation of my CadetThrottle Module! !!!IMPORTANT!!! There are a few slight changes in this version compared to the module version. PLEASE follow these changes or your knob will not work! CHANGES: Straw length: 210mm Straw hole distance (from the rear): 94.7mm New potentiometer form factor: ---- Travel: 100mm ---- Mounting Hole Distance: 120mm ---- Slide Shaft Width: 8mm ----Similar to these:...
Topics: control, simulation, gaming, vince, diy, sim, simulator, flight, Electronics, mixture, design,...

Smoke Screen, Pyrotechnical Mixture for Producing US Patent 4968365
Topics: smoke, mixture, comprises, comprising, potassium, producing, agent, consisting, oxidation,...

Periwinkle and palm kernel shell were sourced, cleaned and incubated in an electric furnace at temperature of 6000C and 1400C respectively, and thereafter grinded and sieved through BS sieve (75microns) to fine ash. Chemical analyses (GC analysis) were conducted on the periwinkle shell  
Topics: Production, cement, mixture, palm kernel