Report on my USB 3.0 driver installation inside Windows Xp from 30 Dec 2018
System data
Host: Windows 8.1
Guest: Windows Xp Home (=32 Bit)
Virtual Box: 6.0.0
Procedure
- Download file Chipset_Driver_GVT5M_WN_3.0.23.0_A00.EXE from https://www.dell.com/support/home/en/en ... erid=gvt5m
- Select USB-3.0-Controller (xHCI) in your VM USB configuration
- Start Guest Windows Xp
- Run the downloaded file and choose unzipping
- Klick the button to open the folder with the unzipped files (...\Dell\drivers\Chipset_Driver_GVT5M_WN_3.0.23.0_A00)
- Run RENESAS-USB3-Host-Driver-30230-setup.exe to install the driver
- Shut down the Guest
- Open a DOS box and insert
"<YourDriveLetter>:\Program Files\Oracle\VirtualBox\VBoxManage.exe" setextradata NameOfVM VBoxInternal/Devices/usb-xhci/0/Config/ChipType uPD720201
If the VM name contains blanks, use quotation-marks ("Name of VM"). Type Enter. Nothing seems to happen (no news is good news).
Command line to remove the extra data is the same as the one to set it, except the final part uPD720201, which must be omitted. - Start the Guest and plug in a USB device. If necessary, visit the VM configuration and add a USB device filter.
Speed gain over USB controllers EHCI / OHCI is remarkable. My synchronizing Guest backup to a USB 2.0 stick now takes 5 instead of 25 minutes (2 ¾ minutes to a USB 3.0 stick).