![BitChute](data:image/svg+xml,<svg xmlns="http://www.w3.org/2000/svg" width="611" height="133"><rect fill-opacity="0"/></svg>)
You are about to action:
Object being modified by the action
Do you want to proceed?
If you wish to action:
Object being modified by the action
Then please send an email request to support@bitchute.com.
Larson Electronics
![play](data:image/svg+xml,<svg xmlns="http://www.w3.org/2000/svg" width="320" height="320"><rect fill-opacity="0"/></svg>)
The Larson Electronics RL-85-3W1-UV405 Ultraviolet LED Pistol Grip Spotlight is an extremely rugged and effective UV spotlight designed to give users in operations requiring ultraviolet illumination a powerful, durable and easy to use source of UV light. This UV spotlight produces an ultraviolet light in the 405 Nm range depending upon configuration, requires no tools for servicing, and runs for 16 hours on a single charge. This powerful UV emitter projects a beam approx. 120` in length by 40` in width.
This light weight, ultraviolet LED spotlight is ergonomically designed to produce a well balanced and easily managed handheld UV light source that can withstand abuse under tactical conditions and operate for 16 hours on a single charge of its integrated lithium ion battery pack. This light contains a single UV LED which is paired with a patent pending reflector design to produce a powerful and effective ultraviolet light beam. Nominal UV intensity of this LED spoltight is 405nm at 5500-6000 W/cm2 at 12 inches. This pistol grip spotlight is designed for high durability with a handle constructed of high impact nylon and an LED fully potted within a lamp assembly constructed of machined aluminum. The LED lamp assembly is protected by a thick Lexan lens and the integral lithium ion battery pack provides long battery life rated at 1,000’s of charge cycles.
Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1
The EPL-QC-16C-2X150LED-RT-100 Portable Explosion Proof LED Tank Light with Wheelbarrow Cart from Larson Electronics produces 42,000 lumens of light capable of illuminating an area 20,000 square feet in size. This adjustable Cree LED unit is designed for maximum portability and durable, versatile operation. This unit is part of the QC Series, providing a quick disconnect mounting system and compatibility with several additional mounting solutions.
Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1
The Larson Electronics LEDWL-ZN-FKLT-RED LED Type EE Forklift Zone Light is suitable for illuminative safety on type EE forklifts in busy work sites, such as warehouses and delivery bays. This LED fixture consumes 27 watts and emits 2,350 lumens of red light during operation. The low profile LED mounts on type EE forklifts and surfaces via two 304L stainless steel brackets.
The LEDWL-ZN-FKLT-RED is a powerful LED zone light for type EE forklifts and operational safety in industrial facilities. This 27-watt unit emits 2,350 lumens of red light during use. Compared to a laser safety light, the LED fixture provides a wider zone line for enhanced visibility and detection. At a height of 15 feet, the LED lamp provides a 30` x 1.5` beam configuration. Operating on 10-100V DC, the LED pedestrian safety light is compatible with a range of standard type EE forklift voltages, including 12V, 24V, 36V and 48V.
Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1
The Larson Electronics HAL-24-2L-LED-BMSW Hazardous Area LED Light Fixture is Class 1 Division 2 Groups A, B, C and D rated - NRTL Certified to UL 1598A, has a T4A temperature rating and ideal for hazardous locations where flammable chemical/petrochemical vapors may be occasionally encountered.
The HAL-24-2L-LED-BMSW fixture is a 2 foot long, 2 lamp, UL listed Class 1 Division 2 Groups A, B, C and D hazardous area LED light that takes the reliability and efficiency of a fluorescent fixture and adds even longer lamp life and efficiency with high output LEDs. This fixture is T4A temperature rated and comes standard with our high power 14 watt LED lamps. The lamps are protected by a powder coated aluminum frame and shatter and heat resistant clear acrylic lens secured with four zinc coated steel draw latches.
Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1
The EPF-VFP-12-120V-NFK-15C-16.3-EPP ensures effective extraction of explosive gases, vapors, hazardous fumes, dust, fibers or flyings in combustible environments. Designed for maximum portability, the unit operates on 120V AC and draws 8.6 amps at startup. The explosion proof ventilation exhaust fan offers 3600 RPM, via a 3/4 HP motor. Capable of providing 2500 CFM of air flow, the weatherproof device contains a 12" inlet for connecting 12" ducts (duct not included). Operators may access an external on/off switch and an external grounding lug for grounding ducting components to the high-performance fan.
Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1
The IND-HVAC-ACS-R1-DE-48-2L-XB AC Coil Sanitation Bolt-in Kit from Larson Electronics prevents bacterial and unwanted growth in AC condenser coils. AC cleaning is facilitated by two double-ended 48" 120W T8HO UV lamps. Mounting hardware, UV warning sticker and power supply are included with the kit.
MORE OPTIONS:
https://www.larsonelectronics.com/search/result?w=IND-HVAC-ACS-R1
Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1
The Larson Electronics LEDLB-32C LED Light Bar offers high light output and extreme durability combined with versatile mounting and power options. This IP68 rated LED light bar is waterproof to three meters and produces 5.70 lumens while drawing only 96 watts of power @8 amps from a 12 volt electrical system. This light can run on any voltage from 9 to 42 volts and comes with lens color options of Red, Green, Blue or Amber. This extremely rugged lighting solution is ideal for use in commercial marine environments as well as industrial and manufacturing applications such as machine vision system lighting, heavy equipment illumination, blasting lighting and mining operations.
Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1
The HUL-LED25WRE LED Handheld Spotlight is ideal for a wide variety of uses including equipment, vehicle, military, law enforcement and industrial manufacturing applications. This ultra compact LED light produces a 2750 lumen output with low voltage and amp draw, 50,000 hour service life and 12 to 32 volt compatibility providing operators with a versatile and powerful LED lighting solution.
The HUL-LED25WRE LED spotlight from Larson Electronics produces 2750 lumen of bright light while drawing less than 2.25 amps from a 12 volt electrical system. A single CREE 25 watt LED producing 2750 lumen is combined with a high output reflector to produce a narrow 10 degree spread spot beam approximately 1000’ long. This particular unit is ultra compact at 4.5" OD lamp head.
Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1
The LED1X10WRE-1S-FLGP-DNS-12V Light is ideal for a flag poles and flag lighting. This ultra compact LED light produces a 860 lumen output with low amp draw, 50,000 hour service life, and comes with an integrated photocell.
The LED1X10WRE-1S-FLGP-DNS-12V flag pole light emitter from Larson Electronics produces 860 lumens of bright light on a 12 V DC electrical system. A single CREE XLamp MC-E® 10 watt LED producing 860 lumens is combined with high purity optics to produce a wide 60° flood beam reaching 250` in length and 288` in width. We also offer a 10° spread spot beam approximately 700` long by 120` in width and a 20° spot reaching 450` in length and 155` in width. This particular unit is ultra compact at only 3" wide by 4.5" tall with mounting bracket by 3.8" deep, which makes it ideal for applications where electrical power and mounting space is at a premium.
Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1
The Larson Electronics GAU-CR-50-10.3-125V-30A 50` 10/3 Tool Tap Reel is designed for extending electrical connections in industrial work sites and general locations. This accessory comes with one, 125V L5-30R receptacle and features mounting compatibility with flat surfaces.
This 50` 10/3 cord reel from Larson Electronics provides a 50` long 10/3 SOOW cord for extended range and convenient operation. The reel with cable features one, 30-amp 125V L5-30R receptacle. This unit is UL Listed (UL/cUL), constructed of durable steel, has a glossy blue powder coat finish and includes a ball stop and a ratchet with a lockout feature.
Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1
The Larson Electronics LEDLB-40 LED Light Bar offers high light output and good durability combined with versatile mounting and power options. This IP67 rated LED light bar is waterproof to 1 meter and produces 7,200 lumens while drawing only 120 watts of power @10 amps from a 12 volt electrical system. This light can run on any voltage from 9 to 42 volts and provides a rugged and compact lighting solution that is ideal for use in marine environments, industrial and manufacturing applications such as machine vision system lighting, heavy equipment illumination, law enforcement, security and vehicle illumination.
Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1
The Larson Electronics HUL-LEDP5W-12E Spotlight is a rugged and effective LED spotlight designed to provide users with a powerful, durable, and easy to use source of reliable light. This spotlight has a 60 watt LED assembly which produces a 5,556 lumen spot beam. This spotlight includes a detachable 16 foot cord terminated in a cigarette plug, battery clamps, or ring terminals for easy connection to vehicle and equipment power sources.
This durable and weatherproof spotlight is ruggedly designed to withstand heavy duty use and includes a 16 foot cord and voltage range from 9-48V DC to allow connection to any vehicle, heavy equipment, ATV, or any low voltage DC power source. Twelve CREE XLamp XPG® five watt LEDs producing 525 lumens each are paired with high purity 10 degree optics to produce a tightly focused spot beam. We also offer optional floodlight versions with a 40 degree beam spread to provide more light over a larger area nearer the fixture, making flood versions ideal for use as work and area lights.
Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1
The Larson Electronics HUL-LEDP1X10W Spotlight is a rugged and effective LED spotlight designed to provide users with a powerful, durable, and easy to use source of reliable light. This spotlight has a 10 watt LED bulb which produces a light beam approximately 650’ long. This spotlight includes a detachable 16 foot coil cord with cigarette plug for easy connection to vehicle and equipment power sources.
This durable and weatherproof spotlight is ruggedly designed to withstand heavy duty use and includes a 16 foot coil cord and cigarette plug adapter to allow connection to any vehicle or ATV equipped with a cigarette plug. This light contains a single 10 watt LED emitter paired with a precision aluminum reflector and impact and scratch resistant lens. This beam is strong enough to allow operators to read signs, license plates, addresses and other similar markings at the far end of its total range.
This spotlight is built for durability and comfort with an impact resistant housing, an ergonomically designed 5 inch tall polycarbonate handle that matches the contours of your hand, and a light head that can be adjusted vertically. The 5.5 inch diameter lamp and reflector assembly is protected by a polycarbonate lens that is sealed against water and dust to provide an IP68 rating and weatherproof protection.
Power options include 12-24 volt DC for use with most common vehicle, boat or ATV electrical systems. The light draws 0.84 amps @ 12V and 0.42 @ 24V. This spotlight is a powerful and rugged design ideal for use in hunting, utility, emergency, industrial/commercial and military/law enforcement applications.
Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1
The CML-4-JD from Larson Electronics is a 12 million candlepower sealed beam spotlight that enables the operator to control position of the light beam and place the light securely at any angle on a metallic surface. The magnetic base that this spotlight is attached to is 3.25" in diameter and has 100 pounds of magnetic grip. These John Deere / Green Bay Packers colored magnetic lights are used as vehicle spotlights, searchlights, utility spotlights, roof mount spotlights, hunting lights, work lights, and linesman lights. The CML-4-JD has a yellow and green finish on the housing that works with both John Deere and Green Bay Packers color schemes.
The CML-4-JD is a 100 watt sealed beam yellow/green spotlight that projects 2750 LUX at 25 feet and reaches distances of 750 feet. This sealed beam unit features a halogen infrared reflective (HIR) bulb. This type of halogen bulb achieves a greater light output while drawing the same wattage as traditional halogen bulbs. This greater light output is due to a special coating used on the bulb and capsule that allows visible light to pass trhough while reflecting infrared (IR) heat back onto the filament of the bulb. The specially designed halogen capsule of HIR lamps features a multi-layered thin film coating that allows visible light to pass through while reflecting infrared energy back to the filament. The reflected energy helps keep the filament within this spotlight at its optimum. The life of the lamp is rated at 450 hours and is the brightest halogen light of the ML series.
Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1
The EPLC2-3X100LED-4-100 Portable Explosion Proof LED Flood Lighting system from Larson Electronics is rated Class 1 Division 2 and Class 2 Division 1-2 and uses three 48 inch LED light heads to produce a combined 21,750 lumens of light with 360° coverage while drawing only 234 watts.
Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1
The Larson Electronics HALS-48-2L-LED-PC Hazardous Area LED Light Fixture is NRTL Listed for United States and Canada Class 1 Division 2 Groups A, B, C and D - NRTL Certified to UL 1598 and ideal for use in industrial hazardous location areas where wet conditions and chemical/petrochemical vapors may be encountered.
Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1
https://www.larsonelectronics.com/search/result?w=37.5%20kva%20pole%20mount%20transformer
The 37.5 KVA Pole Mount Distribution Transformer from Larson Electronics is powerful and designed with the environment in mind. Suitable for both indoor and outdoor applications, the conventional type transformer provides increased reliability and protection against critical equipment failures.
Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1
The Larson Electronics EPL-SL-5-FL26 Explosion Proof String Light set is UL Listed Class 1 Division 1 Groups C and D - and is ideal for general close work and inspection activities in hazardous locations requiring explosion proof protection.
This explosion proof string light set from Larson Electronics contains a total of 5, 26 watt work lights, equipped with aluminum hooks and connected in series along 90 feet of 12/3 SOOW explosion proof cord. A fully potted aluminum junction box is mounted every ten feet, with 3 feet of 16/3 SOOW cord connecting a single drop light to each box. The cord on this unit is terminated with a 1523P Class 1, Division 1 explosion proof plug for complete protection. With this arrangement, each drop light cannot spark if pulled apart and the aluminum junction boxes will not spark if dragged. A 40 foot tail section of main SOOW cord is included to allow ample length for connection to power sources.
Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1
The extremely durable Larson Electronics HALSS-TRN-1000W-MH metal halide hazardous area light produces exceptional illumination from a 1000 watt metal halide lamp. Constructed of corrosion resistant stainless steel and U.L. listed for marine use, this fixture is a versatile and ideal hazardous area lighting solution for areas where wet or corrosive environments are encountered.
Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1
The Larson Electronics LED-A19-12W-E26-RGB 12 Watt RGB LED A19 Remote Control Light is designed to fit in standard light bulb sockets but provides durability and multi color adjustability that makes it ideal for industrial and commercial applications. This 12 watt LED light offers 26 color settings, remote control operation, and the efficiency, durability and long life of LED operation.
The LED-A19-12W-E26-RGB is an LED light bulb that can serve as an A19 LED upgrade from standard light bulbs fitting E26 bulb sockets. Utilizing only 12 Watts and designed to operate with 100-277 Volts AC, this lamp provides higher efficiency than traditional incandescent A19 bulbs and is a direct fit replacement. The A19 is the same base and dimensions as a standard A19 incandescent light bulb, meaning you can use this LED light bulb as a replacement for a standard outdoor flood lamp. However, given the durability and longevity of this LED design, we see this LED light bulb as an ideal solution for a variety of industrial uses.
Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1
The Larson Electronics EPL-LP-24-LED-XEMG Low Profile Explosion Proof light fixture provides operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. LED technology and compact design makes this lamp an excellent replacement upgrade option for bulky and high maintenance cost older fixtures. This explosion proof LED light has a T6 temperature rating and carries a paint spray booth, ATEX and IECEx certifications, and is approved for use in United States, Canada, Europe, and Asia markets. The EPL-LP-24-LED-XEMG is equipped with terminal strips for wiring and an external battery backup feature with a runtime of 90 minutes.
Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1
The Larson Electronics HAL-48-2L-LED-BMSW Hazardous Area LED Light Fixture is NRTL Listed for United States and Canada Class 1 Division 2 Groups A, B, C and D - NRTL Certified to UL 1598A listed, has a T4A temperature rating and ideal for hazardous locations where flammable chemical/petrochemical vapors may be occasionally encountered. This hazardous location LED light carries a United States Coast Guard approval, making it ideal for applications such as oil rigs, ships, offshore applications, petrochemical, manufacturing, chemical storage, and water treatment centers.
Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1
Explosion Proof Paint Booth LED Light
The Larson Electronics HALD-CLS-1X150LED Hazardous Area LED Light Fixture is designed to provide operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. This LED fixture is NRTL listed Class I, Divisions 1 & 2 and Class II, Divisions 1 & 2 and approved for use within paint spray booths. Cree LED technology and compact design makes this lamp an excellent replacement upgrade option for paint booths and hazardous locations where flammable chemical/petrochemical vapors are present.
Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1
The LLP-6X-EPL-PT-150RT-12.3-EPP-120V-125C-EXC.125C-M2 from Larson Electronics is an Explosion Proof LED Flood Light Kit provides operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. This light kit includes six explosion proof LED fixtures which operate on 120-277V AC, a cast aluminum junction box with a 125' SOOW cord and 5-20P explosion proof plug, and a 125' 12/3 SOOW explosion proof extension cord. The LED lights are compatible with pole top slip fit mount applications.
This Class I, Division 2 and Class II, Divisions 1 & 2 explosion proof LED flood light kit includes six LED light fixtures. Each LED light provides 21,000 of high quality illumination while drawing only 150 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install.
Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1
The Larson Electronics IND-LP-SS-48-4L-UVC UV Fluorescent Fixture provides UVC illumination in industrial facilities. This 130-watt unit features four, 4-foot UV fluorescent lamps, housed in a 304 stainless steel housing. The luminary caters to surface mounting and operates on 120-277V AC, 50/60 Hz.
Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1
https://www.larsonelectronics.com
Larson Electronics was started by Ernie Larson in 1973. For nearly 40 years, Larson Electronics has built quality lighting products for the cable, telephone and electric utility industry. Using the Larson Electronics website, we reach new customers in various industries, including utilities, construction and towing. Larson Electronics also services federal, state and local governments throughout the United States and Europe. The US Secret Service, US State Department, Department of Homeland Security. We also provide products to all branches of the US military, both domestically and internationally. We support our customers before, during, and after the sale and maintain a wide inventory of parts and accessories allowing us to service the products we sell. Browse our collection of products and information here on Larsonelectronics.com to learn more about us and how we can help you find solutions for all of your heavy duty and hazardous location lighting needs
Channel Not Monetized
The creator has not yet monetized this channel but you can still support BitChute.
Support BitChute
You can find more ways to support us on the Help Us Grow page.