InnoDisk FiD 2.5" SATA 10000 products provide high capacity flash memory Solid State Drive (SSD) that electrically complies with Serial ATA (SATA) standard. InnoDisk FiD 2.5" SATA 10000 supports SATA II standard (3.0GHz) with high performance. For SLC solution, sustain read is at 160 MB per second (max.), and sustain write is at 140 MB per second (max). InnoDisk FiD 2.5" SATA 10000 uses standard 2.5-inch form factor, which can be used in laptop. InnoDisk FiD 2.5" SATA 10000 is designed for industrial field. The SSD have good performance, no latency time and small seek time. It effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD). InnoDisk FiD 2.5" SATA 10000 can work in harsh environment. The SSD is vibration resistance, and can work in lower or higher temperature than HDD. InnoDisk FiD 2.5" SATA 10000 complies with ATA protocol, no additional drives are required, and the SSD can be configured as a boot device or data storage device.