M.2 Slot for SSDs

The M.2 2280 BM slot provides the following interfaces:

- PCI-Express Gen. 3.0 X4

- SATA v3.0 (max. 6 Gbps)

It supports M.2 cards with a width of 22 mm

and a length of 42, 60 or 80 mm (type 2242, 2260, 2280).

Supports M.2 SATA SSDs (with B+M key) and M.2 PCIe NVMe SSDs (with M key)

 

M.2-2230E slot for WLAN cards

Interfaces: PCI-Express Gen. 2.0 X1 und USB 2.0

Supports M.2 cards with a width of 22 mm and a length of 30 mm (type 2230)

Supports WLAN expansion cards (optional Shuttle accessory: WLN-M)

2x pre-installed antenna cables

 

Card Reader

Integrated SD card reader

Supports SD, SDHC and SDXC memory flash cards

 

Audio

Audio Realtek® ALC897 or ALC 662 High-Definition Audio

Two analog audio connectors (3.5 mm) at the front panel:

1) 2 channel line out (headphones)

2) microphone input

Digital multi-channel audio output: via HDMI and DisplayPort

 

Dual Gigabit LAN

Dual network with two RJ45 ports

Used network chips:

1) Intel i211 Ethernet Controller with MAC, PHY and PCIe interface

2) Intel i219LM PHY connected to the MAC of the processor

Supports 10 / 100 / 1.000 MBit/s operation

Supports WAKE ON LAN (WOL)

Supports network boot by Preboot eXecution Environment (PXE)

Supports Teaming mode

 

Prepared for Wireless Network (WLAN)

2x pre-installed antenna cables (WLAN card and antennas not included)

Prepared for the installation of an M.2-2242 WLAN card and two external antennas

 

Front Panel connectors/buttons

2x USB 3.2 Gen 2 (red, max. 10 Gbps)

4x USB 2.0

Microphone input

Audio Line-out (headphones)

SD card reader (supports SD, SDHC, SDXC)

Power button

Power LED (blue)

HDD LED (yellow)

 

Back Panel connectors

DisplayPort 1.2

HDMI 2.0a

D-Sub/VGA

2x USB 3.2 Gen 2 (red, max. 10 Gbps)

2x Intel Gigabit LAN (RJ45)

Serial COM port (5V / 12V, switchable to RS232 / RS422 / RS485)

DC-input connector for external power adapter

4-pin connector (2.54 mm pitch) for power button, Clear CMOS and 5 V DC

 

Always-On Jumper

By removing Jumper J9 (please refer to the quick user guide),

the system will start unconditionally once power is applied.

 

Scope of Delivery

Multi-language user guide

Two metal feet with four screws M3 x 7 mm

VESA mount for 75/100mm standard (two metal brackets)

Four screws M3 x 7 mm (screws together VESA mount and PC)

Four screws M4 x 10 mm (to fix the VESA mount to the external surface)

Two screws M3 x 5 mm to mount a 2.5" storage in the bay

Two screws M3 x 5 mm to mount M.2 cards

Driver DVD for Windows

External 65W power adapter with power cord (with protective-earth contacts)

Optional Accessories

- PCP11: adapter cable for the second COM port (replaces the VGA port)

- CXP01: adapter cable for external power button

- WWN03: LTE adapter kit for the 2.5" bay including two external LTE antennas

- WLN-M: WLAN module (802.11ac + BT) with two external antennas and cables

- PRM01: 2U rack mount front plate for two Shuttle XPC slim

- DIR01: mounting kit for 35 mm DIN-Rail

 

Environmental Specifications

Operating temperature range: 0~40 °C [5]

Relative humidity, non-condensing: 10~90 %

 

Conformity & Certifications

EMI: CE, FCC, BSMI, RCM, VCCI

Safety: CB, BSMI, cTUVus

Other: RoHS, Energy Star, ErP

This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:

(1) 2014/30/EU relating to electromagnetic compatibility (EMC)

(2) 2014/35/EU relating to Electrical Equipment designed for use within certain voltage limits (LVD)

(3) 2009/125/EC relating to eco design requirements for energy-related products (ErP)