How to install HASP MultiKey USB Dongle Emulator on Windows 7 64 bit

Hello everyone, yesterday my friend asked me to help him to eliminate a HASP dongle from his PC. His PC was installed Strand7 and it needs a USB dongle which has type HASP to work exactly. I accepted his request to help him. I noticed that his PC was installed Windows 7 64 bit Professional.
I searched on Internet and read many web pages regarding dongle emulator. I found a emulator named EDGEHASP2007 but unfortunately it didn’t work on Windows 7 64 bit. Then, I continued searching on Internet and I found HASPHL2010 but it is not free so I didn’t try it. I thought I will give up but I still hope I can find a free emulator. Fortunately, I found this page https://www.techidiots.net/notes/emulate-hasp-hl-pro-1/emulate-hasp-hl-pro describing some steps for installing MultiKey emulator but it noted that you must re-install your software on Windows XP 32 bit after which you must use some tools to dump HASP key and create registry file. Because I didn’t have Windows XP I cannot follow this method. I searched on Internet again and I found this tool [Universal HASP SRM / HL / 4 / Hardlock Dongle Dumper v.1.3]. It can dump HASP key and create registry file for you altogether. It’s a awesome tool made by rengteam. Great thanks to rengteam. Finally, I managed to install MultiKey USB Dongle Emulator.

Now, I want to write some steps here:

Note: I cloned successfully all types of dongles with MultiKey Emulator. The most important step is that you must generate exact registry file. If you have any problem, please drop a comment.

1. Download necessary tools
Download necessary tools here https://drive.google.com/file/d/0Bwv-LAG1rD9ZcTY3dVdidDJHZHc/view?usp=sharing
Password: sonand.com

For dongle Sentinel SuperPro/UltraPro, please download this additional tool https://drive.google.com/file/d/0Bwv-LAG1rD9ZU1JqNy1XOHEyTXM/view?usp=sharing

2. Get dongle password
If your dongle type is Sentinel SuperPro/UltraPro, please skip this step!
The following steps are original here http://www.dongleservice.com/emulate-hasp.phtml, please follow them to get your dongle password. In my case, dongle password is 725F:583A

Start dumper

Run HASPHL2010.exe on machine that has latest version of Aladdin HASP HL dongle drivers installed and original parallel port or USB dongle connected to computer.

Service installation

HASP/Hardlock dumper and emulator designed as low level kernel mode driver and requires Administrators privileges to be installed.
When you start HASPHL2010.exe for a first time you’ll see following window.
Emulate HASP donglePress “INSTALL” button and if installation was successful Driver status window will be changed to “Status : driver is installed”

Starting service

Now you need to open “Emulator” tab.
HASP HL dongle emulatorThen you press “Start Service” button. If everything is ok you’ll see
HASP HL dongle driver

Running your software

To find your key it is necessary to start protected software.

Reading your key.

Open “DUMPER” tab.
HASP HL dongle dumperHASP/HL Dongles window shows logged HASP dongle passwords. In this case, dongle password is 3C39:25A0

3. Create registry file
Now that you already got your dongle password. It’s time to generate registry file.
If your dongle is Sentinel SuperPro/UltraPro, please use SSP2MK_1.2 to generate registry file.

If your dongle is HASP or HASP HL then you need to use RTDumperGUI to generate registry file. Please carefully read readme.txt file before doing. For HASP (or HASP HL) dongle you must input two parts of your dongle password into two contiguous textboxes. For example, my dongle password is 725F:583A so I must input 725F into the first textbox and 583A into the second textbox.
In my case, I got registry file RTDumperGUI/hasp_725F583A/725F583A___.reg. You should rename it to 725F583A.reg and then open it and replace [HKEY_LOCAL_MACHINESystemCurrentControlSet…] with
[HKEY_LOCAL_MACHINESystemCurrentControlSetMultiKeyDumps725F583A]

Now we are ready to eliminate the dongle

4. Install MultiKey USB Dongle Emulator
– Register 725F583A.reg into Registry by right click on it and select Merge

– Click start button DmJx9OIJI5uPhnxQ5vnJjOCSs2G1T3uD8bSBK7ZLf3fhvf4xi0TFmgyaOl7j7MZXfcBG-1NCG96U7WOoHNT7ngCKcoUwt5YDznJbIprkOFK3NLzNHtwfl4yuz2R1KkPu8Q, type uac, then press Enter. It will show User Account Control Settings, please decrease UAC level as follows:

9tYmabVu0XXhWn6-KDgQSsQn8jXsn_i3cj_3RByosvVqKrGaUR7U970YZrw1HHF_9F9rCva3JtsRc-9EXdZC8ExaWC16-2e7a5S57aAwyY9iD5oEIlVhb1C8qtakWmX8QA

– Install MultiKey32 or MultiKey64 (it depends on your OS, for example Windows 7 32 bit, Windows 7 64 bit). If your OS is 64 bit, then open folder MultiKey64 and do as follows:

xX0VjdCpvBlqg4lJi9sYxw_WrDMSJd1sEdUjivZoDqVQK2IZPUBr1Zk5XhN57aYqZZBCAguhqhLc9FkGPMeUxH4SEEVyOnHqeR72_YoIH9zIuX5Gee-rp37MgE3-tIAMnA

You wait for a while, you will see a popup asking you to install a unsigned driver. You must accept to install it anyway. And then, you wait for finishing driver installation successfully.

5. Sign driver by [Driver Signature Enforcement Overrider]

You execute dseo13b.exe and do as follows:

Select [Enable Test Mode] and click Next button
Php4qHA_4YThgnOSBZdAPyW0xEbsu1KkmwqzLgy9UiJGEqa5ktt9LMhvxkzhL9Uv2Px92c2o3m5CcUAll806WH1_C51MWns1t-Yw1loOxvFLrYoVYCirtWEJcgNeprRdFA

Select [Sign a System File] and click Next button
uveliWL0ZKrJsw7qnNfc8rIYaOMiPW9W5A7TffRQt6u6vSFChc5w8YHJ82igiX8FBQG8gLKC3EGVYGIiT2SInjL-5AyohodULh83FyOTbsmVdGTOenpXG1n_M3YHTEiA2A

Find [C:WindowsSystem32driversmultikey.sys] in your OS, it must exist in your OS. If it doesn’t exist, please reinstall MultiKey again.

Input in the textbox [C:WindowsSystem32driversmultikey.sys], click OK
_dPbQgTCpxde61SZ-scwHenUwOLJinDYDPpMpzQntS7eZDOTF9fHLc6Wmt45RStJm-8Zcu-hce1D8tOWeNF2XILmhqDt2v1gYGQ7fN6IIq3OoQtgxv5iiLrCs3ZP_jSb4Q

Select [Exit] and click Next button to exit
Xa-4RkxbJ7e7MRNaKWwy-vxYdIPFDCnzWePWpBQz-n9SGArVvOWF2P00TZuyyHS54ybaBtR2Mcfwh3gofrzSgoaT9KSOkvSG1IsqFfGaL6EchIY9Bo0pe56x9Any0UvGcQ

Now you have to restart your PC, hold down F8 key on your keyboard, you will see the Advanced Boot Options screen, you select [Disable Driver Signature Enforcement] as follows:

HuuOsOw82YXbopf6PhOASC27g-VXjNi0adikHp4H6lfSwS__-vtXdGZSKH4gPQljujL3vgsi6lAIp5IRdy5AHnIzlsFKfZQZci8Tvn_9XOYGW0DpL7ifAzZt9FE6nYprcQ

Press Enter to boot Windows. After Windows is booted it will install the unsigned driver automatically. You should verify the new driver as follows:
Press key combination Windows + R, type devmgmt.msc, press Enter. It should show

tr3IWhiiTfdnGe_8b-ZqJW8PP-AK3OxggBXvkTPRV9uBiCpLX_V93FpZm2TCRu0fTR3Pl3G_0rvrfpqK3_NGpnxlCBKKJVcIVCA8dRNuyoXzS-u6dKySJ3-M504Ugu4NKw

Now you can start your protected software and enjoy it. From now you will don’t have to remember to bring/plug USB dongle.

How to install HASP MultiKey USB Dongle Emulator on Windows 7 64 bit” üzerine 4 yorum

  1. Hi! Thank a lot for a great tutorial.

    I tried this on Windows 32 machine for sentinel hl max.

    I have recovered all password and registry files successfully including two dng files.

    I am shattered in installing the emulator!

    I tried many a times as per the instruction. But I get this message:

    Device driver software was not successfully installed!

    The cmd says:
    “…….
    ROOT\SYSTEM\0001 : Removed
    ……..
    Drivers installed successfully.
    Pes any key to continue…”

    Can you please halo me out? I’m just in the coast, but can’t get down!

    Razib

    Liked by 1 kişi

  2. Hi….

    I have Using Aladdin and sentinel HASP Dongle,
    i Tried to get the Pass-code by HASPHL2010 Application.
    But for dump ..the.button is not active also it asking for password …
    from your procedure, i have seen one url for get the password …but i could’t able to find the password for my dongle …
    Also i have tried to get password by toro monitor application i got error “hardlock file not found”

    Thanks in advance.

    Beğen

Bir Cevap Yazın