sheppard
No, your ASUS H270 won't work with QH8G.
Gigabyte boards a bit capricious when it comes to Sky ES A0.
For GA-H110M-S2H you need to insert 506E0 microcode into F4 bios version and flash it. I don't know if board exactly will work, but this is the method.

GeForce_999
Answered in discord.

slvrsurfr
3 options:
- Just select 1 and continue. Non patched tables not really important. Disable C-states in bios, and no any problems appears.
- Use Revlaay's tool for ACPI patching (he solved this problem), and add remaining mods in CT after.
- Use Revlaay's tool for all patches. I guess it should works fine too.
Besides, in CoffeeTime you need to select "i - insert all cfl-microcodes" variant during update, because 9900KF may use both revisions P0 and R0 (only P0 adding in autoupdate by default).

thejag
Your board will work with 9700K without any problems.
You can try to use russian CoffeeMod manual using online translators.

Bizarre™
There is M10H port-bios for your M9H made by dsanke with all 1151 CPUs support (except Skylake ES). Just flash it with SPI programmer and apply socket pinmod - thats all.
M9H_M10H_v2003_PORT_by_dsanke

mgabee, Bizarre™
This ACPI patch errors usually apperas when path to CoffeeTime includes spaces or local keyboard layout symbols. Try to drop CoffeeTime directory in disk root.

taitu12
Thanks, appreciate this.)
Depends of revisions. 8100 usually use B0 rev. (906EB). 9400F use U0 (906EA), but it potencially may exist in P0 (906EC) or R0 (906ED) rev., so you need identify it before, to make right modbios.
Use CoffeeTime comparison image to recognize revision by visual.

imbatman
What's the problem? You can make modbios yourself with any automated coffeemod tool.

hawkdown77
Yes, you can.

davidm71
It's not a socket degradation, it's just no any isolation were applied.
Pins are melted because without isolation it make short circuit and small contact pad (1-2 pins) will works like a fuses and burns at first, before any serious damage.
You may see, that for Gigabyte 100 there are a lot of pins for isolation. If they all wasn't isolated then a large contact area will allow to save pin pads but VRM will be damaged.

Check out 1151 v1/v2 pinout comparison.

wolff2310
There is no similar board at Z370 lineup, so only experiments may helps.
I can make some port-bioses but it can be dangerous for your board cause VRM difference. And you'll need SPI programmer.

shaggy
Yes, all of 100/200 Gigabyte boards can work with any Coffee Lake without problem.
For example Z270-HD3 + Xeon 8/16.

WannaBeOCer
Instant shutdown after poweron - 99% it's problem with ME.
Did you use SPI programmer or unlocks regions with HDA_SDO pinmod?

CoffeeTime 0.85a released.
Nothing special.
Added universal ME for Xeon, Vbios base up to 1062, updated microcodes, unlocked Xeon autoupdate for most of 200-series boards and added pretty nice experimental function for ASUS boards.
Full list in readme.txt
Download

dooby
This is BIOS-lock feature from ASUS. Described below appliable only for B0 Coffee (i3-8xxx etc).
Check actual ME version on your board by Intel ME Detection Tool.
Three options exists:
1) Your ME is already between 11.6 - 11.7 and it's ok.
In this case you need to reflash only BIOS-region from modbios.
Just use AFUWIN 3.05.04 for flashing, it will help to get around ASUS BIOS-lock problem. Command: afuwinx64 modbios.bin /GAN
Or disable BIOS-lock first and flash with FPT then. Command: fptw64 -rewrite -bios -f modbios.bin
2) Your ME lower than 11.6.
Update ME to 11.6 - 11.7 version by any official method, then go to point 1.
3) Your ME 11.8.
Use SPI programmer to reflash bios fully or try to unlock regions by HDA_SDO and then flash full image with any software tool.