Configuration of your VESC® or VESC® based ESC using the VESC®-Tool Software.
In this tutorial we will configure a single, genuine VESC® motor controller in combination with a PPM signal based radio controller in Current No Reverse with Brake mode.
Make sure to use the latest VESC-Tool version!
Download from http://www.vesc-project.com/vesc_tool
Make sure your radio is in FAST mode when doing the next steps!
Some radios have a switch to enable a SLOW or FAST mode.
Some radios require you to push the on/off button a second time, after powering on the device.