3DS Guide for Seedminer

Getting your Game patched

Section I - Using the DIS

1. Open this website (if it should be offline or not working, you can use this one instead)
2. Download the ctcert.bin and the injection archive USA/EUR/JPN.zip
3. Upload the game XXXXXXXX.bin you previously saved to your Desktop in the DSiWare.bin field
4. Upload your movable.sed and the ctcert.bin in their corresponding fields
5. Unzip the downloaded injection archive and upload the game_XXX.app and the public_XXX.sav in their corresponding fields
6. Click "Start!" and wait a few seconds
7. The website will automatically offer the patched game as download
8. Rename it by removing the .patched part, so it ends in .bin - for example XXXXXXXX.bin

Section II - Re-Import the Game

1. Power off your 3DS and insert your SD Card into your PC
2. Navigate to Nintendo 3DS > Your ID0 > 32 character folder > Nintendo DSiWare
3. Copy the patched XXXXXXXX.bin file you downloaded and renamed into this folder, overwriting the file that is already there.
4. Reinsert the SD Card into your 3DS and power it on
5. Open System Settings, navigate to Data Management > DSiWare
6. Tap SD Card, tap your game and tap "Copy". Overwrite the existing copy
• Your game may appear as Sudoku even if it isn't the purchased game
7. Exit System Settings and start your game
• You should be greeted by a solid green screen. This is the intended result
• NOTE: You may need to load further into the game so it loads the modified save file
If the game boots up normally, you have done something wrong. Redo the process from Section I above

Section III - Preparing your SD Card

1. Power off your 3DS and insert your SD Card into your PC
2. Download the latest Version of Luma3DS
3. Download the latest Version of b9sTool
4. Download the latest Version of Boot9strap (NOT the devkit, NOT the ntr version)
5. Download the latest Version of the Homebrew Menu
6. Download the .firm files corresponding to your system, so either OLD or NEW 2/3DS
   You will need a torrent client like deluge or qbittorent to download the file!
   These files work on firmware version 11.4 / 11.5 / 11.6!
• 2.54-0_11.4_OLD.firm
• 2.54-0_11.4_NEW.firm
7. Copy boot.firm from the Luma3DS 7z archive to the root of your SD Card
8. Copy boot.3dsx (Homebrew Menu) to the root of your SD Card
9. Copy boot.nds to the root of your SD Card
10. Create a folder called boot9strap on the root of your SD Card
11. Copy boot9strap.firm from the boot9strap .zip to the /boot9strap/ folder on your SD Card
12. Copy 2.54-0_11.4_OLD.firm or 2.54-0_11.4_NEW.firm to the /boot9strap/ folder on your SD Card

Section IV - Installing boot9strap and configuring Luma3DS

1. Launch b9sTool by starting your DSiWare game
• You may need to load further into the game so it loads the modified save file
2. Select "Dump F0F1" to backup the 3DS FIRM
3. Select "Install boot9strap" and confirm
4. Wait for it to say "done!". Exit b9sTool and power off your 3DS
• You may need to force power off by holding the power button
5. Boot up your 3DS while holding (Select) to launch the Luma3DS configuration menu
   • If your 3DS boots normally to the HOME Menu then boot9strap did not install correctly. Replace your prep files with freshly downloaded files and restore the F0F1 backup in b9sTool. Do not create a new F0F1 backup! Then try reinstalling boot9strap again
6. Use the (A) button and the D-pad to turn on "Show Nand or user string in System Settings"
7. Press (Start) to save and reboot

You can now continue with the Finalizing Setup