I think somebody already warned us about his scam, but we seemed ignore it that time. The comment was removed by either Kickstater or him. Could there be Kickstarter co-cheat our money with him?
I ordered this for a birthday in April and have yet to hear anything about shipping...do we have any new news? Or do I need to make an alternative birthday plan?
Have you thought about doing a dot-matrix-like scan sort of like the old CRT technology used to do? Perhaps optimize it by spitting out a horizontal spread moving top-to-bottom on the grid? Would that even work? I can already anticipate there would be problems like leveling out the projection angle - but would the grid be able to support something like that?
@ Alta Media: New Videos are incoming on the first week of the year. We have been working super hard on sourcing and prepping the new community site. Expect updates soon.
Jaime,
Thanks for the reply. Yes, if you can post any vids of the MK II RGB, it might inspire some of us (including me) to want to upgrade from the green only version (which you might allow?)
We will continue to post updates and share the progress of the production models. At the same time we will continue to develop Holovect further and incorporate any advances into our products.
The Mk II RGB can draw each line with a different color. Individual vectors can be adjusted to 0-255 for each of Red Blue and Green. Objects can have up to 200 vectors and each can be different color.
@ Tim Newsom: Tim there is one on the story section and we're uploading the rest shortly. We are doing a whole breakdown on animation. Starting with a wing.
Use this space to cheer the creator along, ask questions, and talk to your fellow backers. Please remember to be respectful and considerate. Thanks!
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Show older commentsJaime Ruiz-Avila 2-time creator 5 days ago
We have been working really hard on fulfillment. We will update soon with more info. Please stand by.
Alta Media 5 days ago
I think somebody already warned us about his scam, but we seemed ignore it that time. The comment was removed by either Kickstater or him. Could there be Kickstarter co-cheat our money with him?
Mark Greenwald
Superbacker
7 days ago
Echoooooo....
thomas heiman on April 1
No response whatsoever?
SaltyBrains
Superbacker
on March 29
money lost ?
Mark Greenwald
Superbacker
on March 27
Hi
Mark Greenwald
Superbacker
on March 21
Hi
SaltyBrains
Superbacker
on March 20
Any updates ?
Kim Storeygard on March 20
I ordered this for a birthday in April and have yet to hear anything about shipping...do we have any new news? Or do I need to make an alternative birthday plan?
Alta Media on February 21
No further update after fundraising has been successful. Would it be another dead silence again?
eulenberg
Superbacker
on February 21
Jaime,
Would be nice to get some news on what you are working on or how things procced. Any update would be nice.
Thanks Michael
Alta Media on February 4
How are videos of RGB vectors hologram
thomas heiman on January 28
Any news or videos would be really nice..
Mark Greenwald
Superbacker
on January 26
@Creator
Any thoughts on advancing this tech to combine with DLP-like tech to "scan" rather than draw on the grid?
Mark Greenwald
Superbacker
on January 15
@Jaime Ruiz-Avila
Sorry if this has been answered already:
Have you thought about doing a dot-matrix-like scan sort of like the old CRT technology used to do? Perhaps optimize it by spitting out a horizontal spread moving top-to-bottom on the grid? Would that even work? I can already anticipate there would be problems like leveling out the projection angle - but would the grid be able to support something like that?
Jaime Ruiz-Avila 2-time creator on January 10
Stay tuned should be uploading some RGB stuff soon.
Mark Greenwald
Superbacker
on January 10
Any new updates coming soon? Been waiting for someone to make this tech since I was about 5 years old. You have to keep pushing forward with this! :P
Jaime Ruiz-Avila 2-time creator on December 29
@ Alta Media: New Videos are incoming on the first week of the year. We have been working super hard on sourcing and prepping the new community site. Expect updates soon.
Alta Media on December 18
@ Jaime (the Creator): could you send us some videos of Holovect with RGB demos as you promised to us couple month ago?
SaltyBrains
Superbacker
on December 12
when can we have it! :D
thomas heiman on November 21
I am eagerly waiting for any news, videos etc..
Jaime Ruiz-Avila 2-time creator on November 21
Working on some upgrades, should be up in a few minutes
thomas heiman on November 21
The holovect.com website is down..
thomas heiman on November 21
The holovect.com website is down..
Jaime Ruiz-Avila 2-time creator on November 11
@ Robert Weebe: We have RGB demos in the works and will post them as soon as we can get around to. Thanks again.
Jaime Ruiz-Avila 2-time creator on November 11
@ Robert Weebe: Thanks Robert yes we will definitely allow upgrades. We will inquire how it all works and post an update about it.
Robert Weebe
Superbacker
on November 11
Jaime,
Thanks for the reply. Yes, if you can post any vids of the MK II RGB, it might inspire some of us (including me) to want to upgrade from the green only version (which you might allow?)
Thanks,
Robert
Lilieth Valeria Lopez Peña on November 11
This comment has been removed by Kickstarter.
Jaime Ruiz-Avila 2-time creator on November 11
You have mistaken me for somebody else. Please contact me personally if you have any questions about the project.
Lilieth Valeria Lopez Peña on November 11
This comment has been removed by Kickstarter.
Jaime Ruiz-Avila 2-time creator on November 11
Thanks again and welcome to the future.
Jaime Ruiz-Avila 2-time creator on November 11
We will continue to post updates and share the progress of the production models. At the same time we will continue to develop Holovect further and incorporate any advances into our products.
Jaime Ruiz-Avila 2-time creator on November 11
We have worked on this effort for several years and it's gratifying to see it become a product that we can all develop for as a community.
Jaime Ruiz-Avila 2-time creator on November 11
I wish to take the opportunity to thank everybody who backed this project
Jens Johan Sundet on November 11
This comment has been removed by Kickstarter.
Jaime Ruiz-Avila 2-time creator on November 10
We have not posted any yet, maybe in the next two days.
Jaime Ruiz-Avila 2-time creator on November 10
The Mk II RGB can draw each line with a different color. Individual vectors can be adjusted to 0-255 for each of Red Blue and Green. Objects can have up to 200 vectors and each can be different color.
Robert Weebe
Superbacker
on November 9
Jaime,
Can the deluxe color version draw in multiple colors, or just one at a time? Have you posted any videos of the color versions?
Thanks,
Robert
Jaime Ruiz-Avila 2-time creator on November 8
@ Tim Newsom: Let me know if you can't see it.
Jaime Ruiz-Avila 2-time creator on November 8
@ Tim Newsom: Tim there is one on the story section and we're uploading the rest shortly. We are doing a whole breakdown on animation. Starting with a wing.
Tim Newsom on November 8
Hmm, I can't seem to find them. I looked in the gallery but I only see things that were posted in October.
Jaime Ruiz-Avila 2-time creator on November 8
New Demos Today on the Description and gallery.
Micah Talkiewicz on November 7
Only 3 days left! Please stream and demo!
Jaime Ruiz-Avila 2-time creator on November 7
Yes, coming very soon, I hope you will like them.
Tim Newsom on November 7
Any news with regard to the new demos?
Jaime Ruiz-Avila 2-time creator on November 5
Maybe, stay tuned. But we will live stream for sure. We will post an update to set time and let people know.
Micah Talkiewicz on November 5
How about tomorrow for a stream?
Jaime Ruiz-Avila 2-time creator on November 5
Nope, you do need to change or wash the filters every six months or so.
John Dallman on November 5
This is interesting stuff. Does a holovect unit need any supplies or consumables, apart from electricity?
Jaime Ruiz-Avila 2-time creator on November 5
@ Micah Talkiewicz: We should be able to work that out.