|
Martin Scheffler wrote:
I'm trying to access running on a remote machine through the web interface, so I modified the following line in the freenet.conf on the remote machine: fcpHosts=127.0.0.1,ip_address_of_my_machine Is that all I need to do? It didn't work for me... :< That line is only for FCP (port 8481 standard). try mainport.allowedHosts=... I tried (I have the same problem) but nothing : I have a "document contains no data" with my browser (mozilla). 1. Edit the mentioned line in freenet.conf/freenet.ini, for example: mainport.allowedHosts=127.0.0.0/8,192.168.33.0/24 (don't forget to remove the % mark!) 2. Restart the node I forgot to remove '%' !! (What a shame :-) ) Thanks !!! good byte You too. Thanks again. ------------------------------------------------------------------------ _______________________________________________ Support mailing list Support-RdDMkVZAZeuJnvDnx1genB2eb7JE58TQ@xxxxxxxxxxxxxxxx http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://dodo.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-request-RdDMkVZAZeuJnvDnx1genB2eb7JE58TQ@xxxxxxxxxxxxxxxx?subject=unsubscribe _______________________________________________ Support mailing list Support-RdDMkVZAZeuJnvDnx1genB2eb7JE58TQ@xxxxxxxxxxxxxxxx http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://dodo.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-request-RdDMkVZAZeuJnvDnx1genB2eb7JE58TQ@xxxxxxxxxxxxxxxx?subject=unsubscribe
Thread at a glance:
Previous Message by Date:Re: Access the web interface from remote machines.>>>I'm trying to access running on a remote machine through the web >>>interface, so I modified the following line in the freenet.conf on the >>>remote machine: >>> >>>fcpHosts=127.0.0.1,ip_address_of_my_machine >>> >>>Is that all I need to do? It didn't work for me... :< >> >>That line is only for FCP (port 8481 standard). >> >>try mainport.allowedHosts=... > I tried (I have the same problem) but nothing : I have a "document > contains no data" with my browser (mozilla). 1. Edit the mentioned line in freenet.conf/freenet.ini, for example: mainport.allowedHosts=127.0.0.0/8,192.168.33.0/24 (don't forget to remove the % mark!) 2. Restart the node good byte pgpHzNaDTnka3.pgp Description: signature _______________________________________________ Support mailing list Support-RdDMkVZAZeuJnvDnx1genB2eb7JE58TQ@xxxxxxxxxxxxxxxx http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://dodo.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-request-RdDMkVZAZeuJnvDnx1genB2eb7JE58TQ@xxxxxxxxxxxxxxxx?subject=unsubscribe Next Message by Date:Bad request URI???Hi, I have just tried to insert a file into the network, running stable build 5084. After the successful insertion, I used the URI: freenet:CHK-fOgKJ9GEJ2+GJtvoR9HPD29kaUf69H6U@xxxxxxxxxxxxxxxx to request the file just inserted on the main web interface page, but it reported that this was a 'bad URI'. Have I done anything wrong?? Thanks. -- Best regards, Weiliang _______________________________________________ Support mailing list Support-RdDMkVZAZeuJnvDnx1genB2eb7JE58TQ@xxxxxxxxxxxxxxxx http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://dodo.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-request-RdDMkVZAZeuJnvDnx1genB2eb7JE58TQ@xxxxxxxxxxxxxxxx?subject=unsubscribe Previous Message by Thread:Re: Access the web interface from remote machines.>>>I'm trying to access running on a remote machine through the web >>>interface, so I modified the following line in the freenet.conf on the >>>remote machine: >>> >>>fcpHosts=127.0.0.1,ip_address_of_my_machine >>> >>>Is that all I need to do? It didn't work for me... :< >> >>That line is only for FCP (port 8481 standard). >> >>try mainport.allowedHosts=... > I tried (I have the same problem) but nothing : I have a "document > contains no data" with my browser (mozilla). 1. Edit the mentioned line in freenet.conf/freenet.ini, for example: mainport.allowedHosts=127.0.0.0/8,192.168.33.0/24 (don't forget to remove the % mark!) 2. Restart the node good byte pgpHzNaDTnka3.pgp Description: signature _______________________________________________ Support mailing list Support-RdDMkVZAZeuJnvDnx1genB2eb7JE58TQ@xxxxxxxxxxxxxxxx http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://dodo.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-request-RdDMkVZAZeuJnvDnx1genB2eb7JE58TQ@xxxxxxxxxxxxxxxx?subject=unsubscribe Next Message by Thread:Bad request URI???Hi, I have just tried to insert a file into the network, running stable build 5084. After the successful insertion, I used the URI: freenet:CHK-fOgKJ9GEJ2+GJtvoR9HPD29kaUf69H6U@xxxxxxxxxxxxxxxx to request the file just inserted on the main web interface page, but it reported that this was a 'bad URI'. Have I done anything wrong?? Thanks. -- Best regards, Weiliang _______________________________________________ Support mailing list Support-RdDMkVZAZeuJnvDnx1genB2eb7JE58TQ@xxxxxxxxxxxxxxxx http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://dodo.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-request-RdDMkVZAZeuJnvDnx1genB2eb7JE58TQ@xxxxxxxxxxxxxxxx?subject=unsubscribe
|
|