www.acmesystems.it
|
|
|
|
|
ACQUA A5Atmel SAMA5D3x (Cortex-A5@536 MHz) system on module with LCD interface Acqua A5 is a low cost System-on-Module (SoM) thought of to drastically reduce the development time needed to design a low-power and low-EMI Linux Embedded device.The more complex hardware like CPU, RAM, Ethernet, power and EMI components are integrated on a single component in just 53x53 mm (2.08x2.08 inch) using a complex PCB with 10 layers permitting hardware designers to create their carrier board on simple and cheap 2 layers PCBs. |
|
|
|
ARIA-G25Atmel AT91SAM9G25 (ARM9@400MHz) SMD Systems on Module Aria G25 is a cost-effective System-on-Module created for hardware designers who want to drastically reduce the working time spent on Linux Embedded devices development. On this 40x40 mm surface mount device (SMD) are already integrated all the complex components like CPU, RAM, Ethernet PHY, EMI filters and power section needed to create the core of a Linux Embedded board leaving more time for the other aspects of your application. |
ARIETTA-G25
Atmel AT91SAM9G25 (ARM9@400MHz) tiny module for DIY applications Tiny, cheap and easy to use Linux Embedded module for DIY and Makers cultures |
|
|
|
TERRA
Linux embedded system for fast prototyping Terra is a complete device based on the Aria G25 module useful to quickly create prototypes and small productions based on the Aria G25 module. It is easily expandable using the Daisy add-on boards and has an integrated GPRS modem for remote controlled applications. A ready to use enclosure is available to realize applications for the end-user market. The schematic is freely available as reference for custom design based on Aria G25 module. |
FOX Board G20
Atmel AT91SAM9G20 (ARM9@400MHz) Linux embedded board FOX Board G20 is Single Board Computer built around the ARM9@400Mhz Atmel CPU AT91SAM9G20. Two 40 pin sockets pitch 2.54mm are available to plug the board on specific application carriers or add-on boards. On these pins 3.3 Volt signals are available which can be used to implement RS232/RS485/RS422, I2C, SPI, GPIO, A/D and PWM interfaces.. |
|
|
|
DAISY add-on interfaces for Terra and FOX Board G20
Mini expansion boards for Terra and Fox Board G20 Daisy is our set of peripheral interfaces to easily extend Terra Board and FOX Board G20 boards. |
|
|
Atmel© Certified Partner |
Documentation Terms of Use
Acme Systems provides this documentation "as is" without warranty or guarantees of any kind.
We not provide any direct support for the Open Source preinstalled software but, through
these pages and forum posts, all of the information required to obtain the sources, install, use and update the
Open Source software that can be run on the Acme boards.
Please note that all of the preinstalled software, used on the Acme Systems products, are Open Source so you have
to check the license terms provided by the authors (usually the GPL) before using it in any commercial or non-commercial
product, by yourself.
Before to contact us please note that WE ARE MAINLY HARDWARE DESIGNERS
and NOT LINUX GURUS and therefore could be better to post your questions to the
Acme Systems forum and ensure
that all of the site contributors and large software community can read and reply to
your questions.
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 3.0 Unported License.