Installing VMware ESXi 5.1 - IBM System x3850 M2 and IBM System x3950 M2 (7233, 7234)



Installation instructions for VMware ESXi 5.1 for IBM System x3850 M2 and IBM System x3950 M2 (7233, 7234)

Table of contents

1.0 What you will need
2.0 Where to download device drivers and files
3.0 Preparing the hardware
4.0 Installing VMware ESXi 5.1
5.0 Notices

Revision level: 1.00

Updated: 10 May 2013

© Copyright International Business Machines Corporation 2013. All rights reserved. US Government Users Restricted Rights - Use, duplication, or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.

Note: Before using this information and the product it supports, read the general information in 5.0 Notices in this document.

Supported servers: IBM System x3850 M2 and IBM System x3950 M2 (7233, 7234)

Follow the instructions in this document in sequential order, unless these instructions advise you otherwise. Throughout this document, the term select is used to denote the use of arrow keys, the Tab key, Alt + a letter combination, or the mouse to make a selection.

Note: Actual windows and messages might be different from those in this document.

References to optional hardware in this document do not imply support of that hardware. For information about supported options, see the ServerProven information for your server at this location: http://www.ibm.com/systems/info/x86servers/serverproven/compat/us/

1.0 What you will need

You must have the following software and hardware for the installation:

  • A registered copy of VMware ESXi 5.1
  • Supported hard disk drives. See http://www.ibm.com/systems/info/x86servers/serverproven/compat/us/ for the ServerProven list of supported options and part numbers for the server.
  • One blank diskette to create a BIOS code update diskette. Additional blank diskettes may be needed for firmware updates.

2.0 Where to download device drivers and files

You can download device drivers and files from the following sites:

You can download product specifications from the following site:

3.0 Preparing the hardware

To prepare the hardware, update system firmware, and configure arrays, see the IBM System x3850 M2 and IBM System x3950 M2 (7233, 7234) Installation Guide and User's Guide at the IBM Support Portal.

4.0 Getting Started with VMware ESXi 5.1

To install VMware ESXi 5.1, complete the following steps:

  1. Follow the detailed instructions in vSphere Installation and Setup Guide to configure VMware ESXi 5.1.
  2. For further information about installation and support of guest operating systems and configuration an administration of VMware ESXi 5.1, go to the vSphere 5.1 Documentation Center.

    Note: Enable remote logging when you set up embedded ESXi, before any problems occur, so that IBM Support can solve complex problems quickly if they occur. For instructions for setting up remote logging, follow the instructions in http://www.ibm.com/support/docview.wss?uid=isg3T1012616

    **The IBM custom image supplies the customer with four important deliverables:

    1. It is tested across IBM's server and adapter portfolio with the same ServerProven support guarantee as VMware's base release.
    2. The image enables support of IBM's tools, including ToolsCenter, which give the customer the ability to flash System x, BladeCenter, and Flex System firmware such as: uEFI, IMM, pDSA, FPGA, and vendor firmware from Broadcom, Brocade, Emulex, LSI, and Qlogic.
    3. The image includes the latest drivers that align with VMware's release schedule.  These updated drivers support IBM's portfolio to include such adapters as the Emulex 10 Gigabit Ethernet Virtual Fabric Adapter I and II for IBM System x, QLogic 10 Gigabit Converged Network Adapter for IBM System x, and Brocade 8 Gigabit Fibre Channel Dual-Port Host Bus Adapter for IBM System x.
    4. The image includes vendor CIM providers allowing for additional hardware alerts within vCenter.  The providers also give the customers the ability to use specific vendor tools for managing their environment.


    5.0 Notices

    INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you.

    This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice.

    IBM, the IBM logo, and ibm.com are trademarks or registered trademarks of International Business Machines Corporation in the United States, other countries, or both. If these and other IBM trademarked terms are marked on their first occurrence in this information with a trademark symbol (® or ™), these symbols indicate U.S. registered or common law trademarks owned by IBM at the time this information was published. Such trademarks may also be registered or common law trademarks in other countries. A current list of IBM trademarks is available on the Web at http://www.ibm.com/legal/copytrade.shtml.

    Linux is a registered trademark of Linus Torvalds in the United States, other countries, or both.

    Other company, product, or service names may be trademarks or service marks of others.

該当する国および地域

 


文書 ID:  MIGR-5092918
最終変更日時:  2013-05-10
著作権 © 2014 IBM Corporation