This document is editable by everyone. If you know of an OID, please add it. If one is incorrect, please correct it and add notes.
Monitoring CPU on Routers
1.3.6.1.4.1.9.2.1.58.0
Monitoring Memory on Routers
1.3.6.1.4.1.9.9.48.1.1.1.6.1
PIX/ASA/FWSM
System: 1.3.6.1.2.1.1
Interfaces: 1.3.6.1.2.1.2
IP: 1.3.6.1.2.1.4
Memory: 1.3.6.1.2.1.4.1.9.9.48
CPU: 1.3.6.1.2.1.4.1.9.9.109
Firewall: 1.3.6.1.2.1.4.1.9.9.147
Buffers: 1.3.6.1.2.1.4.1.9.9.147.1.2.2.1
Connections: 1.3.6.1.2.1.4.1.9.9.147.1.2.2.2
SSL Stats: 1.3.6.1.4.1.3076.2.2.26
IPSec Stats: 1.3.6.1.2.1.4.1.9.9.171
Remote Access Stats: 1.3.6.1.2.1.4.1.9.9.392
FIPS Stats: 1.3.6.1.2.1.4.1.9.9.999999
Active Connections in PIX/ASA Firewall: 1.3.6.1.4.1.9.9.147.1.2.2.2.1.5.40.7
The total number of currently active IPsec Phase-2 Tunnels: 1.3.6.1.4.1.9.9.171.1.3.1.1.0
You will need the following MIBs: IF-MIB, RFC1213-MIB, CISCO-MEMORY-POOLMIB, CISCO-PROCESS-MIB, ENTITY-MIB, CISCO-SMI, CISCO-FIREWALL-MIB, ASA also adds CISCO-IPSEC-FLOW-MONITOR-MIB, CISCO-FIPS-STAT-MIB, and ALTIGA-SSL-STATS-MIB.
ENTITY MIB
Serial Number for stackable switches
1.3.6.1.2.1.47.1.1.1.1.11.1
IOS Version for stackable switches
1.3.6.1.2.1.47.1.1.1.1.9.1
ARP Cache on a router
1.3.6.1.2.1.3.1.1.2
Last state change of an interface
1.3.6.1.2.1.2.2.1.9.[interface number, ie 27]
Cisco 7206vxr router
CPU: 1.3.6.1.4.1.9.2.1.58.0
Mem: 1.3.6.1.4.1.9.9.48.1.1.1.5.1
Temp intake 1: 1.3.6.1.4.1.9.9.13.1.3.1.3.1
Temp exaust 2: 1.3.6.1.4.1.9.9.13.1.3.1.3.2
Temp exaust 3: 1.3.6.1.4.1.9.9.13.1.3.1.3.3
Temp exaust 4: 1.3.6.1.4.1.9.9.13.1.3.1.3.4
Cisco 6509 Switch Chassis Temperature
Switch Engine intake: 1.3.6.1.4.1.9.9.91.1.1.1.1.4.1007
Switch Engine exaust: 1.3.6.1.4.1.9.9.91.1.1.1.1.4.1008
Slot 1 Intake: 1.3.6.1.4.1.9.9.91.1.1.1.1.4.1001
Slot 1 Exaust: 1.3.6.1.4.1.9.9.91.1.1.1.1.4.1002
Slot 2 Intake: 1.3.6.1.4.1.9.9.91.1.1.1.1.4.2001
Slot 2 Exaust: 1.3.6.1.4.1.9.9.91.1.1.1.1.4.2002
Slot 3 Intake: 1.3.6.1.4.1.9.9.91.1.1.1.1.4.7001
Slot 3 Exaust: 1.3.6.1.4.1.9.9.91.1.1.1.1.4.7002
Slot 4 Intake: 1.3.6.1.4.1.9.9.91.1.1.1.1.4.10001
Slot 4 Exaust: 1.3.6.1.4.1.9.9.91.1.1.1.1.4.10002
Slot 5 Intake: 1.3.6.1.4.1.9.9.91.1.1.1.1.4.9001
Slot 5 Exaust: 1.3.6.1.4.1.9.9.91.1.1.1.1.4.9002
Slot 6 Intake: 1.3.6.1.4.1.9.9.91.1.1.1.1.4.3001
Slot 6 Exaust: 1.3.6.1.4.1.9.9.91.1.1.1.1.4.3002
Slot 7 Intake: 1.3.6.1.4.1.9.9.91.1.1.1.1.4.4001
Slot 7 Exaust: 1.3.6.1.4.1.9.9.91.1.1.1.1.4.4002
Slot 8 Intake: 1.3.6.1.4.1.9.9.91.1.1.1.1.4.5001
Slot 8 Exaust: 1.3.6.1.4.1.9.9.91.1.1.1.1.4.5002
Slot 9 Intake: 1.3.6.1.4.1.9.9.91.1.1.1.1.4.6001
Slot 9 Exaust: 1.3.6.1.4.1.9.9.91.1.1.1.1.4.6002
Results are in Celcius. To convert to Farenheit [* 1.8 + 32]
Cisco AS5300 series
1.3.6.1.4.1.9.10.19.1.1.9.1.3.3.1 = Number of Active DS0's on a DS1
Cisco Nexus 5K and 7K series inlet and outlet temperatures:
1.3.6.1.4.1.9.9.91 (Returns a table for Module, Sensor, Thresholds in Centigrade, Current Temp in Centigrade, and Status)
Certain Cisco 3750's inlet temperature:
1.3.6.1.4.1.9.9.91.1.1.1.1.4
American Power Conversion (APC) Management Cards
Battery Remaning: 1.3.6.1.4.1.318.1.1.1.2.2.1.0
Load: 1.3.6.1.4.1.318.1.1.1.4.2.3.0
Average Hi Voltage: 1.3.6.1.4.1.318.1.1.1.3.2.3.0
Average Low Voltage: 1.3.6.1.4.1.318.1.1.1.3.2.2.0
This one is also quite usefull if you want an 'all is fine' state from the APC UPS's
.1.3.6.1.4.1.318.1.1.1.4.1.1.0
INTEGER {unknown(1), onLine(2), <======== All is fine when it says 2 onBattery(3), onSmartBoost(4), timedSleeping(5), oftwareBypass(6), off(7), rebooting(8), switchedBypass(9), hardwareFailureBypass(10), sleepingUntilPowerReturn(11), onSmartTrim(12) }
Cheers,
Michel |