The SecureBrowser for iPhone and iPad is a browser that is mainly designed to be used to connect to intranet web sites. The Columbitech Mobile VPN client is integrated with a web browser so all data traffic will go through a mobile VPN tunnel that is established with a mobile VPN server.

Settings overview:

Web settings - Here you can configure your start page, split VPN (only supported if your mVPN server allows that) and Proxy server settings.

mVPN Server Settings - Configure the address and port of your mVPN server. The server group is needed if your mVPN server is configured to use a Gatekeeper.

Credentials - Configure the user name and domain that you use to connect.

Security - Here you can set the Private Key password for your client certificate. Enable Verify server identity to verify the server certificate. Set Server certificate common name to verify the common name of the servers server certificate. DTLS can be used against mVPN servers that support that.

If you plan to connect to one of the fearlessmobility.com VPN servers you will need to have a Google Account, since this is required to access the service. If you do not have a Google account, you can register at https://accounts.google.com/SignUp

When prompted by the VPN client on your iOS device to enter your Google account name and password, please enter your Google account name (e.g. john.doe@gmail.com) and password.


Last Reviewed: 2012-06-18

This article applies to: 4.1.0.46 and later

Category: Public