Model:KG100
USB Temperature and Humidity Data Logger Instruction Manual
1. Display2. - key3. + key4. Set key5. USB port6
．
Reset
- 1 -
①
②
1.Temperature2. Humidity
⑤
3. Memory status display4. Record interval5. Time/Date/year
③
④
1. Introduction
Thank you for choosing this item for your data logging requirement. Small simpleand affordable, data logger can measure and record data at specified intervalsranging from once every 60 seconds to once every 4hours. It is our goal to bring youaccurate, low-cost, easy-to use data logger that integrate easily into the user’sworking environment.
1.1 Package Contents
1x data logger unit
1x USB cable
1x CD ROM
1x 3 V lithium battery CR2032
Instruction manual
- 2 -
1.2 Features:
Measure and log termperatuer and humidity data
Instant data download with PC/laptop
USB interface for set-up and data download
Easily re-configurable using included software
Selectable logging intervals from 1minute to 4 hours (default 1minute)
Selectable measurement in °F or °C
Time, date and unit synchronized your PC
2. Installation
2.1 Insert battery
When the unit is powered up, all LCD segments will light up for about 3 seconds
Caution:
Do not reverse polarity of the batteriesWait 10 seconds before re-insert the battery again to make a proper reset.
2.2 Wall amount
You can mount this item on a wall by using a screw (not included)
- 3 -
検索履歴:
結果00中00
00結果次の結果
p.
Download and print this document
- Read offline in your PDF viewer
- Edit this document in Adobe Acrobat, Notepad
- Keep a copy in case this version is deleted from Scribd
- Read and print without ads
- Email the file
Choose a format to download in
.PDF
.TXT
ダウンロード
コメントを書き込む