© Sprayrend Info@sprayrend.com
Traditional rendering suffers from inherent problems due to modern construction practices. Inconsistent sand and cement mixes, addling, shrinkage and crazing are liable to occur as insufficient time is allowed between coats. Masonry paint is then applied affecting the renders ability to breath. This traditional method of Rendering and Decoration requires a trades person and their assistant visiting the same area on four or more separate occasions, costly in time and manpower. Now the same finished article can be achieved with only one or two visits depending on weather conditions.
Over the years render technology has moved on, Factory batched through coloured render systems represent a breakthrough product that can be applied on to a number of different substrates subject to manufacturers specification. Carefully selected colours and aggregates make up the range of Renders that produce a decorative finish that can be scrape finished or textured, giving years of trouble free, minimal maintenance.
Acrylic and silicone thin coat renders represent a very customisable product, with thousands of colours and a number of finishes.
Spray Applied Rendering offer the most efficient and cost effective method of rendering. Smaller areas may be hand applied.
We can offer a number if different wall facade packages, including standard render, Monocouche render, acrylic or silicone wall coverings and insulation cladding.
One Coat, Through Coloured Monocouche Render.
One Coat, Through Coloured, Fine Finish Monocouche Render.
A polymer-modified dry powder cement-based render mortar.
Pre-blended single coat application renders.
Preparatory key coat for rendering.
A new-generation one-coat, through-coloured mineral render for use with weber.therm XP external wall insulation system.
Silicone-based, through-coloured, decorative finish
Factory batched proprietary silicone monocouche render. This attractive mica containing through-colour render provides an ideal mineral finish for masonry type substrates.
ProRend Colourtex is a factory batched silicone resin thin-coat render. This attractive render is available in a wide range of colours including NCS, RAL and our own range. It is suitable for application onto the widest range of substrates with an appropriate ProRend basecoat and is available in 2 textured finishes: Uniform 1.5mm and Grained 3mm.
Is a water repellant, cement based, polymer modified, self coloured render.
Uses ‘High Polymer’ technology, for cost effective performance on difficult substrates.
Is a cement based, highly polymer modified fibre reinforced base coat.
Is a standard cement based mortar mix and can be used as render.
Standard finish one-coat through coloured weather resistant decorative
render - 48 standard colours
Fine finish one-coat through coloured weather resistant decorative render - 48 standard colours
Through coloured hydrated lime plaster/ornamental plaster
Reductions in labour and time, allowing scaffold to be dismantled and ground works to begin earlier in the programme. Monocouche Renders offer real overall cost benefits over traditional methods.