© Sprayrend Info@sprayrend.com
Provides significant advantages over traditional flooring screeds in terms of speed of application, increased accuracy of placement, possible reduction in thickness and thanks to outputs up to 10 times greater than conventional screed, significant cost saving to your project.
It has high impact resistance and readily achieves the requirements for category A floors.
The product is based on Alpha hemi hydrate or Anhydrite and is distinguished by a number of special technical properties.
Key benefits
* High early strength
* High volume stability, no curling or lifting
* Ability to lay large areas without joints
* Reduction in thickness when compared to traditional methods
* High placing rates and construction progress
* Freedom from the need to use reinforcement below ceramic finishes
* Quicker access for follow on trades.
Anhydride screeds are made from waste products from chemical industries. This means that 1 ton of binder used saves 1 ton of landfill.
has a comprehensive range of high performance floor systems suitable for use in all commercial and industrial environments in addition to marine applications. Weber has products that can accept a floor covering within three days, for fast track projects.
Design Floor Screeds
weber.floor 4650 duro colour
a standard drying screed for levelling & smoothing concrete substrates.
weber.floor 4635 duro stone
a standard drying screed for levelling & smoothing concrete substrates.
Calcium Sulphate Screeds
weber.floor 4095 alpha smoothing screed
Calcium sulphate smothing compound.
weber.floor 4490 alpha screed
Self levelling base screed.
Industrial Screeds
weber.floor 4600 duro base
a standard drying screed for levelling & smoothing concrete substrates
Acoustic Screeds are possible with Knalf Floorfoam 5 or Floorfoam 10
And has been developed to comply with the requirements for a resilient layer below a screed in separating floors and has been tested to provide Part E, PCT compliant floors with either traditional or liquid screeds.
Read more: Floorfoam below screed
We are proud to announce that we have expanded our business with a new branch in Medway, Kent for floor screeds. We now cover from Cornwall to Kent along the south coast.
Lafarge Gyvlon is suitable for:
• Sub-floor levelling in both commercial
and domestic buildings.
• Providing a smooth, flat surface for the application of all types of floor coverings.
Lafarge Gyvlon screed offers complete versatility of
use with both thermal and acoustic insulation, and
enhances the performance of most under-floor
heating systems due to its thinner section.
Key benefits
* High early strength
* High volume stability, no curling or lifting
* Ability to lay large areas without joints
* Reduction in thickness when compared to traditional methods
* High placing rates and construction progress
* Freedom from the need to use reinforcement below ceramic finishes
* Quicker access for follow on trades.
• Fully Bonded 25 mm
• In contact with the substrate/ Unbonded 30 mm
• Floating Commercial 40 mm
• Floating Domestic 35 mm
• Cover to conduits/ underfloor heating pipes 30 mm
We have updated our product range, we can now offer
Lafarge Gyvlon Flowing Screed.
Lafarge Gyvlon gives cost/time savings over traditional hand applied sand and cement screed.