If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=n85lcd
Tools required: Torx 6 screwdriver, torx 5 screwdriver, Phillips size 0 screwdriver, plastic tool such as a guitar
plectrum or credit card.
- Remove your back cover, battery, sim and memory card. Remove the two
screws circled below.
- The camera cover will now be loose and can be removed. Next remove
the four screws circled in the picture below.
- Lift the front of the phone up and you'll see that it is connected
to the other half of the phone by a ribbon cable. The circled connector
needs to be disconnected. It attaches like a plug and socket. Just lever
it up to unplug.
- Your phone should now look like below. Remove the two circled screws
then move the slider down and remove the two screws at the other end of
the phone.
- Run something like the edge of a credit card around the join of the
front cover to release it.
- With the front cover removed your phone will look like below.
- Lift the keypad membrane up. It will be stuck down lightly with
double sided tape. Slide your plastic tool under to release it. Then
unplug the circled connector by levering it away from the keypad
membrane.
-
Now slide your plastic tool under the LCD screen to release it.
-
You should now have the LCD screen removed. Reverse the whole procedure for reassembly.
If you have any questions about Nokia N85 disassembly, email
rob.lee@formymobile.co.uk. The official service manual for this phone may also help you with further
Nokia N85 disassembly. Click here for details
|
|