This modification is done using the Playmates brand, 1994 Classic Star Trek Phaser... (stock #6118)




I think you will enjoy this tutorial of my 12X Blu-ray Star Trek Phaser Mod!





12X Blu-Ray Star Trek Phaser video! - Click here!




This first post is a 'picture tutorial' of how the wiring is done for this build using a 3 volt supply, and a FlexDrive. Many other details shown too...


Important: Most of the people here at LPF already understand the potential eye hazards involved with something like this. But for those who are new to lasers, this modification can damage the eye instantly with a direct shot or reflection. Proper eye protection for 405nm wave length is recommended. And extreme caution needed when using. I would recommend storing it in a lockable case so that it cannot be accessed by just any person or child...

Eye Protection: (405nm)
http://store.oemlasersystems.com/ind...91239ce0cbfdb4


Be sure to check out my custom EzFocus adapter shown in this tutorial!



I have parts available in this FS thread - Click here!







12X Build - Key Features:

* Room for a nice size heatsink.
* Safety switch with LED. (sound will operate when the laser is NOT armed, and also when the laser IS armed)
* Custom 'cone tipped' EzFocus adapter.
* Using the stock trigger button from the phaser!
* FlexDrive: http://hacylon.case.edu/ebay/laser_d..._FlexDrive.php

I am running this 12X blu-ray build at 320mA's for good longevity. (hopefully)




Here are the pictures and details...



The heatsink is the exact same design and fit, as my Green Star Trek Phaser mod. The only difference is the set screw location. This heatsink is for an AixiZ module. My 'cone tipped' EzFocus adapter is measured for a flush fit AixiZ module using my 405-G-1 glass lens mod and this heatsink design...







Trigger:




I used a momentary button switch so I could use the stock trigger button. This gives it kind of a 'hair trigger'. (but I like it) So that's why I decided to put a safety switch on this one...








Safety switch mounting:













Wiring and Circuitry







Current draw:

* Sound board - 120mA's
* LED - 15mA's
* 12X diode (FlexDrive set at 320mA's - 3 volts supply) - 710mA's

Total - 845mA's - New Energizer e2 lithium primaries.

I should get about 2 hours run time...




Output power:

465mW's using my 405-G-1 glass lens modification.







EzFocus adapter, and details of the nose modification and fit:








Note: You must be careful when threading your lens into the AixiZ module using the EzFocus adapter. There could be a possibility to ‘cross thread’ the lens. (because the nose cap and the heatsink need to be aligned) I recommend using silicone glue on one side of your heatsink, and threading the lens and EzFocus adapter in place while it dries. This will set the heatsink in the perfectly aligned position inside the phaser…









Hope you enjoyed this project!







12X Blu-Ray Star Trek Phaser video! - Click here! (for best view)







Check out my Green Star Trek Phaser Tutorial here!
Tutorial: Star Trek Phaser Mod! - Green...






Click here to see my list of projects and tutorials!

Nice project, Jayrob, with the 12X in there you will actually be able to set laser to "stun", definitely burn.

Great job.

Stay tuned...

Edit: Just added a nice video above!

wanna see beamshots!

Me too! Edit: Just added a beam shot and a nice video...

My material for the custom EzFocus adapter will be here any day now...

And my 12X drive will be here tomorrow! (Thursday)

Nice clean job as usual... and I like the Safety switch and Blue LED
ARMED indicator...

I've still got my Phaser in it's box...
So many projects.... So little time...


Jerry

Thanks Jerry!

I really like the safety switch and LED too...

In fact, I ordered some blue and green LED's just to have on hand. (3 volt/3mm)

I plan on putting a green LED with a safety switch in my Green Star Trek Phaser mod now...

With this you can pop dark balloons instantly. I request this to make a sound like a laser pulse and a video of it poping balloons like if you shooted once per balloon XD

Well...

It's only got two sound selections on it, but if you just pull the trigger and then let go, I guess that's the same effect as a pulse.

I'll see about getting 3 or 4 balloons lined up for some obliteration video...

Edit: Video added in first post!

I request that you get a retro Star Trek costume and add some arms and scary faces in the balloons... You see where I'm going with this.

Hey don't forget the hot Trek girl stand-ins

Ha ha!

I better just let your imagination fill in the details there...

Finished it!



There are much more details shown in the first post now.

Details about the current draw and output power...



Last but not least, pictures and details of my custom EzFocus adapter for this mod!



Edit: And now a video too!

same here man. I have a Phaser gutted for laser modification but haven't actually put the laser in there yet. my buddy Pat traded for a laser and I got the phaser. If someone wants the phaser gun I'm open for offers.

-Ken

LOL just Star Trek weapons, on the modding field ? ..... i always wondered to modify something different, like as example the Visitors guns, but i have basically the same problem of Jerry (too few time and too much things to fit in it )

Anyway, i think that your mod is a great well done work, my congratulations

Star Trek Movie Electronic Phaser - Playmates - Star Trek - Prop Replicas at Entertainment Earth

I wonder if the barrel pivot is automatic. I doubt it but it can be done

Nice! But not a kid's toy for sure, even if it looks like one.

That is sick 12x in a phaser thats awesome!!! Take some more beam shots i really wanna see some more that thing is a beast......

I see the barrel pivot is spring loaded. maybe a solenoid mod can be made to it for the other direction.


YouTube - Reviewing the New Star Trek Phaser with Rick Moyer


Anyway I ordered a few so it looks like I'm going to jump on the Phaser train....

For sure not a kids toy anymore! (man toy)

I keep them in a case. The case has a combo lock too if I wanted to lock it...




Yep... I'm going to get a nice video showing the sounds and the safety switch. As well as the custom EzFocus adapter.

I'll get some balloon pops too... Edit: Video added!

As promised...



12X Blu-Ray Star Trek Phaser video! - Click here! (for best view)

Your cone tipped Ez Focus Adapter is sweet, it turned out better than i expected

Uhm ...... about this ......



Do you know that this is a provocation, for the DIY maniac part of me ? .....

i think it depend from how much space you have at the top of the rotating part, but i think it can be done auto-turning with a cheap servo from DX (5$, if i recall correctly), modified, and one of those lever microswitches 2PST (a deviator, two positions, long lever, possibly soft to move)

Something like this, maybe .....



Two pins on the finned part take care about the switch that stop the movement, shifting it when the rotation is at the right point, and the other switch set the position, and need to be put somewhere on the body (maybe a slider switch or one of the computer mini-clicky switches, near where the thumb is when you hold the phaser, so it can be acted without use two hands) ..... the servo, if i recall correctly, have usually 180 degrees of movement, so it's enough for rotate it completely without require extra gears ..... just take away the electronic board from it and use it "as is", directly connected to the motor ..... and if it roll in the opposite direction, just swap the wires :P (and adding a 100nF capacitor in parallel of it, can prevent disturbs to the rest of the electronic too)

Oh, btw, they usually works from 3 to 6 V, so if the phaser use a 9V battery, maybe better put a resistor in serie ..... if uses a pair of AA cells, 3V are enough, just a bit more slow

Great job Jay sick phaser !!!

I was looking for the old style phaser at toysrus and they didn't have anymore so not wanting to go home empty handed I purchased 2 of the new movie phasers. I like the stun/kill feature you twist it manually and it locks in place then when you press the button it spins back. I made red/blu-ray both sides phr-803t and a loc. I also made a green one but it was only
10mWs , I sold the pair. I think i'll have to do it again but this time keep them and move on up to a 12x diode

Nice HIMNL9


I was thinking a solenoid and cable for speed. Finding one with enough travel and strength to rotate it as it is. Then use a single pole switch like you illustrate with your double pole.

I see what I'm up against when It gets here. If the original spring is to heavy or I can't find the right solenoid with the travel I need, I will definitely move toward doing something more like your illustration.



Thanks,

Ryan