The Talk Voice 2/4 LV+ is a 2- or 4-Port DSP-based Analog Interface Voice Board with superior telephony features, excellent quality, at a competitive price. Includes drivers for Windows 2000 and XP. REV B1 JUST RELEASED - THESE ARE UPDATED BOARDS WITH UPDATED DRIVERS. YOU'LL SEE BETTER COMPATIBILITY WITH THE FASTER PROCESSORS IN NEW PCs AND EASY INSTALLATION AND CONFIGURATION WITH THE EASYTAPI INSTALLATION SOFTWARE
Digidictate.com :: Digital Dictation & Transcription Software
Products
Resources
Company Info
Login
Talk Voice 2/4 LV+ Analog Interface Voice Board

image
Click for a larger version

Data Sheet (pdf)

EasyTAPI Telephony Software Kit (10 MB)


Pricing

TalkVoice 4LV+ board w/drivers LIST PRICE $750 - OUR PRICE $480   CLICK HERE TO BUY NOW

TalkVoice 2LV+ board w/drivers LIST PRICE $450 OUR PRICE $295   CLICK HERE TO BUY NOW

CALL 800-852-2526 FOR MORE INFO OR EMAIL .(JavaScript must be enabled to view this email address)

Features

- Two/four independent voice processing ports supporting low-to medium-density voice systems in a single PC
- Two extra audio jacks allow voice monitoring and auxiliary audio input
- �-law voice coding with selectable data rates 32 Kb/s or 64 Kb/s on a channel-by-channel basis
- Configure multiple boards in a single PC for easy and cost-effective system expansion, capable of scaling from 2 to 16 ports
- Caller ID detection, supports FSK as well as DTMF
- Full duplex voice channels for VoIP applications
- Bundled with TAPI and wave drivers for Windows 2000 and Windows XP
- Support LC Drop/Polarity Reversal detection
- Detailed call progress monitoring & analysis
- Support line-echo canceller (LEC)


Applications

- Interactive Voice Response (IVR)
- Automatic Call Distribution (ACD)
- Unified Messaging System (UMS)
- Unified Communication (UC)
- TAPI-compliant applications
- Voice applications


Technical Description

Configuration
The Talk Voice 2/4LV+ provides two/four telephone line interface circuits for direct connection to analog loop start lines. Up to 4 Talk Voice boards can be installed in a single PC chassis enabling port expansion up to 16 ports per system.


Network Interface
The Talk Voice 2/4LV+ supports powerful call progress analysis, provides parameters programmable for country-specific regulation ,enhanced DTMF detection & cut-through, and PABX-specific tones detection. Quality voice recording in ADPCM, PCM or WAV formats.


Open Architecture
The Talk Voice 2/4LV+ boards share a common driver architecture with other Talk Voice boards, offering users and developers both, maximum flexibility and scalability. All Talk Voice products support standard TAPI and wave drivers for Windows 2000 and Windows XP.


Technical Specifications

General
Number of ports: 4 (4LV+)
Number of ports: 2 (2LV+)
Max. boards per system: 4
Digital signal processor: TI TMS 320VC5402 @100 MIPS

Host Interface
Electrical: Rev. 2.2 of PCI bus specification
Bus speed: 33 MHz maximum
Shared memory: 256 KB dual port static memory
Address and interrupts configured automatically by PnP BIOS or PnP OS
Board ID: Rotary switch to uniquely identify each board

Telephone Interface
Line interface: Loop-start
Connectors: Two RJ-14 jacks
Return loss: 20 dB min (300 to 3300 Hz at 600 Ohms impedance)
Caller ID: International Caller ID capability via on-hook audio path

Audio Signal and Interface
Audio I/O jacks: 3.5mm audio in & out jacks
Automatic gain control (AGC)
Silence detection: programmable (nominal: -44 dBm)
Call progress monitoring: standard and custom frequency based

Audio Encoding
Sample rate: 8KHz
32 Kbps OKI ADPCM
64 Kbps ?law PCM
64 Kbps windows 8-bit PCM
Line Echo Canceller (LEC)
Allow to compensate up to 16 milliseconds (ms) of tail-curcuit path delays.

DTMF Tone Detection
DTMF digits: 0 to 9, *, #, A, B, C & D
Dynamic range: -36 dBm to -3 dBm per tone
Tone duration: 40 ms (minimum)
Acceptable twist: 10 dB

Tone Dialing
Transmit level: normal at -6.0dBm (high), -8.0dBm (low), parameters programmable
Frequency variation:

< 1%

Bundled Drivers and Software
Bundled with TAPI and wave drivers for Windows 2000, 2003, and Windows XP

Software Compatibility
Microsoft TAPI and wave driver compliant applications

Power Requirements
+3.3V @1.0A
+12V @200mA
-12V @200mA

Size
215mm (L) x 107mm (H); 8.46” (L) x 4.2” (H)

Certification
Telephone network: FCC Part 68
EMI: FCC Part 15, Class B
BSMI / TAIWAN

Environment
Operating temperature: 00 to 500 C (320 to 1220 F)
Storage temperature: -200 to 650 C (40 to 1490 F)
Humidity: 10 to 80%, non-condensing

 


Intelligent Audio File (IAF) is an advanced digital dictation file format, specifically designed by Quikscribe, to provide advanced RICH audio dictation and transcription capabilities.
Quikscribe: Making document production... faster and smarter